Galaxy Tab Active 3 Firmware Stock ROM: Flash File

SM-T577U/ Galaxy Tab Active 3 flash fileOff the chance you are looking for the Galaxy tab Active 3 flash file, this is the right article you have come to. In this article, we are going to discuss how you can install the SM-T577U flash file on the system. Stay tuned to the article till the end to know more about the Galaxy Tab Active 3 flash file.

Preliminary Preparations

Below we have mentioned all the things that you will have to do before you can start the flashing process. Have a look at the list.

  • You must know that this tutorial is valid only for this device. You can not use the same tutorial for other devices.
  • Also, you need to charge the dice completely or at least up to 70 percent so that you can use them till the end of the process.
  • It is important that you create a backup of all the data available on the device because, after the completion of the flashing process, you will lose all the data.
  • You must know that if any damage is caused to your device, the company won’t be responsible for the same.

Steps to Install Galaxy tab Active 3 Flash File

You need to use the Odin tool to install the Galaxy tab Active 3flash file on the system. Below we have mentioned all the steps that you will have to follow to install the flash file on the system. Read the steps carefully and follow in the same way as mentioned.

  • To start with, you will have to download the Samsung USB driver on the system. Click on the downloaded file to open the installation window. Follow the on-screen instructions to complete the installation process.
  • Also, you will have to download the stock firmware file on the system and then extract the files to the desired location.
  • Now, you will have to turn off the device, and then you will have to boot it into download mode.
  • To boot it, you will have to press the power button, volume down button, and home button together and when your device starts vibrating, you will have to leave the power button only.
  • Now, you will get a warning on the screen. To continue with the process, you will have to press the volume up button.
  • Now, you will have to download the Odin tool on your system and then you will have to extract the files of the tool.
  • Now, in the tool folder, you will have to look for the Odin3 file to open the tool window for you.
  • Once done, you will have all the required files by selecting them from the firmware file that you have downloaded.
  • You will then have to click on the start option to begin the flashing process.
  • Wait for it to complete. When it will complete, you will get a successful message on the screen.
  • Now, you will get the device in the boot loop. So, fix it, you will have to boot the device in the recovery mode.
  • To boot it, you will have to press the power button, volume down button, and home button together and when your device starts vibrating, you will have to leave the power button only.
  • A menu will now appear on the screen and you will have to click on the wipe data or factory reset option.
  • Wait for it to complete. When done, your device will restart.

Download Samsung Galaxy Tab Active 3 Stock Firmware ROM (Flash File)

So, this is how you can install the Samsung Galaxy Tab Active 3 flash file. Following all the steps, in the same way, will help you to carry out the process easily. We hope that this article helps.

Leave a Comment