Huawei Y360-U61 Firmware Stock ROM- Flash File

Huawei Y360- U61 Flash fileIn case you are looking for the Huawei Y360- U61 flash file, this article can help you. In this article, we have discussed how you can install the Huawei Y360- U61 flash file (firmware Stock ROM). Read the article to know in detail.

Requirements

Below we have mentioned all the things that you will have to keep in mind so that you can carry out the process easily.

  • To begin with, you will have to make sure that you have basic knowledge about the process. In case you are not aware, you will have to seek help. Also, you need to use this tutorial for a particular device only.
  • Next, you will have to download the tool file and the firmware file from an authenticated source only and according to the device that you are using. Look for a compatible driver on the system.
  • You would know that you will lose all the data available on the device. So, you need to create a backup of all the data.
  • You will have to use the device till the end of the process, so, you need to charge it completely or at least up to 70 percent.
  • Also, you will have to scan all the files to be sure that they are safe to use on the system.

Steps to Install Huawei Y360- U61 Flash File

Now that you have fulfilled all the requirements that we have mentioned in the above section of the article, proceed with the process. Below we have mentioned all the steps that you will have to follow to install the Huawei Y360- U61 flash file. Read all the steps carefully and follow in the same way as mentioned.

  • To begin with, you will have to download the Mediatek driver on your system. Now, you will have to click on the downloaded file and start the installation process. You will now have to complete the installation process by following all the instructions appearing on the screen. If you already have the driver on the system, skip the step.
  • Next, you will have to download the firmware file for your device. You will then have to extract the contents of the firmware file for later use.
  • The next thing that you need to do is to download the SP flash tool on the system. You will then have to extract the contents of the flash tool also.
  • Now, you will have to open the extracted tool folder and then click on the flash tool file. The tool file will open on the system.
  • After this, you will have to click on the download agent option and scatter-loading option. You will have to look for the scatter file in the stock ROM that you have downloaded.
  • Next, you will have to untick the option for preloader.bin. It is a must to do because if you won’t, you can brick the device.
  • Now, you will have to click on the download option to begin the flashing process.
  • Once done, you will have to turn off the device and then connect it to the system with the help of a USB cable. You will then have to press the volume up button of the device so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will start.
  • Wait for the process to complete. When the process will complete, you will see a green ring on the screen.
  • Finally, detach the cable and terminate the tool window.

Download Huawei Y360-U61 Stock Firmware ROM (Flash File)

To use Huawei Y360-U61 Flashing Tool, You must download and install WinRAR or 7Zip.

This is it. You have now flashed your device successfully. This was all you need to know to install the Huawei Y360- U61 Stock Firmware ROM. We hope that the article was helpful for you.

Leave a Reply