Flash files can be very helpful when it comes to upgrading the device to the latest version or downgrading it to the factory version. They contain the operating system of your device in the original form. Also, you can fix common issues that you face with the device by installing a flash file on the device. In this article, we are going to talk about the Intex Aqua 3G strong flash file (Firmware Stock ROM). We have mentioned how you can install the Intex Aqua 3G flash file on the device. Read the article till the end to know more about it.
Points to Remember
To carry out the process easier, you will have to do certain things. Below we have mentioned a list of all the things that you will have to do. Read the list.
- First, you will have to make sure that you use the tutorial on a particular device only. Using it on any other device can damage it.
- You need to be aware of the technicalities so that you can carry out the process easily. In case you are not aware, you will have to seek help.
- You would know that you will lose all the data present on the device post flashing. So, it is important that you create a backup of all the data present on the device.
- Other than this, it is a must that you download the firmware file and tool file according to your device only. You will have to make sure that you are using a compatible version of the driver.
- Lastly, you will have to scan all the files so that you can be sure that it is safe to use on the system.
Steps to Install Intex Aqua 3G Strong Flash File
As we have mentioned you will have to use an SPD tool to install the Intex Aqua 3g strong flash file, here is how you can use it. Below we have mentioned all the steps that you will have to follow to install the Intex Aqua 3g strong flash file. Read the steps carefully and follow in the same way as mentioned.
- To begin with, you need to download the SPD driver on the system. You will then have to click on the downloaded file and follow the on-screen instructions to complete the installation process. In case you already have the driver on the system, skip the step.
- Next, you will have to download the stock firmware files on the system. Then, you will have to extract the contents of the files.
- Now, you will have to download the SPD upgrade tool on the system and then you will have to click on the extract the contents of the tool files also.
- After this, you will have to open the extracted tool folder and then you will have to click on the Upgrade downlooad file.
- You will have to now look for the load packet option in the tool window. Now, redirect the tool to the location where you have stored the flash file.
- After that, you will have to turn off the device and then you will have to connect it to the system using a USB cable.
- Now, you will have to click on the start option to begin the process.
- Wait for the process to complete. When the process will complete, you will get the upgrade successful message on the screen.
- Now, you will have to detach the cable and terminate the tool window.
Download Intex Aqua 3G Strong Stock Firmware ROM (Flash File)
This is it. This was the full stepwise process that you need to follow to install the Intex Aqua 3g strong flash file. We hope that the article was helpful to you.