Intex Aqua Power 4G Firmware Stock ROM- Flash File

Intex Aqua Power 4G Flash FileIn case you are looking for the Intex aqua power 4G flash file, this article will be helpful for you. We have provided you with the original Intex Aqua Power 4G flash file / Firmware Stock ROM and explained to you how to install the same. Read the article till the end to know more about it.

Prerequisites

Now, in this section of the article, we have mentioned a list of certain things that you will have to do so that you can carry out the process easily.

  • First, you need to be aware of the technicalities of the process. In case you are not aware, you will have to seek help from an expert.
  • You will also have to make sure that you use this tutorial for the specified device only. Using it for any other device can damage the device.
  • You would know that you will lose all the data after the completion of the flashing process. So, you need to create a backup of all the data present on the device.
  • It is a must to charge the device completely or at least up to 60 percent so that you can use the device till the end of the process.
  • You will also have to download the firmware file and driver file according to the device that you are using or from an authenticated device. It is a must to download the latest version of the tool file.

Steps to Install Intex Aqua Power 4G Flash File

Hopefully, you have fulfilled all the requirements that we have mentioned in the above section of the article. You can now proceed with the process. Below we have mentioned all the steps that you need to follow to install the Intex Aqua Power 4G flash file / Stock Firmware on the device. Go through all the steps carefully and follow in the same way as mentioned.

  • To begin with, you need to download the MediaTek driver on the system. You will now have to click on the downloaded file and open the installation window. Complete the installation process by following all the steps appearing on the screen. In case the driver is already available on the system, skip the step.
  • After this, you will have to download the stock firmware file for the device. You will then have to extract the contents of the firmware file.
  • Next, you will have to download the SP flash tool on the system. Extract the contents of the tool files also.
  • You will then have to open the extracted tool folder and then click on the flash tool file. The tool window will then open on the screen.
  • Now, you need to untick the option for preloader.bin. You must do this because if you won’t, you can brick the device.
  • Once done, you will have to click on the download option to begin the process.
  • Also, you need to turn off the device and then connect it to the system with the help of a USB cable. You will also need to press the volume up button of the device so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will begin.
  • Wait for the process to complete. When the process will complete, a green ring will appear on the screen.
  • You will now have to detach the cable and terminate the tool window.

Download Intex Aqua Power 4G Stock Firmware ROM (Flash File)

To use Intex Aqua Power 4G Flashing Tool, You must download and install WinRAR or 7Zip.

This is it. This was the full process that you need to follow to install the Intex Aqua Power 4G Stock Firmware. All the information that you need to know before installing the Intex Aqua Power 4G flash file is mentioned in the article. We hope that the article was helpful.

Leave a Reply