Intex Aqua Power HD 4G Firmware Stock ROM- Flash File

Intex Aqua Power HD 4G Flash FileIn case you are looking for the Intex Aqua Power HD 4G flash file, this article will surely be helpful. We have mentioned how you can install the Intex Aqua Power HD 4G flash file / Firmware Stock ROM on the device. Read the article till the end to know more about it.

Preliminary Preparations

Now, in this section of the article, we have mentioned a list of certain things that you need to do before you can install the Intex Aqua Power HD 4G flash file.

  • To begin with, you need to be aware of the technicalities of the process. In case you are not aware, you will have to seek help from an expert.
  • You will also have to make sure that you use the tutorial for the specified device only. Using the tutorial for any device can damage the device.
  • You would know that you will lose all the data after the completion of the process, so, you need to create a backup of all the data.
  • It is a must to charge the device completely or at least up to 60 percent so that you can use the device till the end of the process.
  • You will also have to download all the required files from an authenticated source and according to the device that you are using.
  • Always scan all the files that you will download to be sure that all the files are safe to use on the system.

Steps to Install Intex Aqua Power HD 4G Flash File

In this section of the article, we have mentioned how you can install the Intex Aqua Power HD 4G Stock Firmware. Below we have mentioned all the steps that you need to follow to install the flash file on the system. Read all the steps properly and follow in the same way as mentioned.

  • First, you need to download the MediaTek driver on the system. You will then have to click on the downloaded file and then start the installation window. Follow all the instructions appearing on the screen to complete the installation process. In case the driver is already present on the system, skip the step.
  • Next, you need to download the stock firmware file for the device. You will then have to click on the downloaded file and extract the contents of the firmware file.
  • After this, you need to download the SP flash tool on the system. You will then have to extract the contents of the flash tool file.
  • Once done, you need to open the extracted tool folder and then click on the flash tool file. The tool window will then open on the screen.
  • In the tool window, you need to click on the scatter-loading option and download agent option. The scatter file will be available in the stock ROM that you have downloaded.
  • Now, you need to click on the preloader.bin option. You must do this because if you won’t, you can brick the device.
  • Next, you will have to click on the download option to begin the process.
  • Now, turn off the device and then connect it to the system with the help of a USB cable. Also, press the volume up button so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will begin. Wait for the process to complete.
  • When the process will complete, a green ring will appear on the screen.
  • Finally, detach the cable and terminate the tool window.

Download Intex Aqua Power HD 4G Stock Firmware ROM (Flash File)

To use Intex Aqua Power HD 4G Flashing Tool, You must download and install WinRAR or 7Zip.

So, this is it. You have successfully installed the Intex Aqua Power HD 4G Stock Firmware ROM on the device. Following all the steps, in the same way, will help you to install the Intex Aqua Power HD 4G flash file easily. we hope that the article was helpful.

Leave a Reply