Intex Aqua Power Plus Firmware Stock ROM- Flash File

Intex Aqua Power Plus Flash FileIn case you are looking for the Intex Aqua Power Plus flash file, this article can help you. We have mentioned how you can install the Intex Aqua Power+ flash file / Firmware Stock ROM with the help of the SP flash tool. Stay tuned to the article to know more.

Requirements

To carry out the process easier, here is a list of certain things that you will have to do or keep in mind before starting the process. Have a look at the list below.

  • You will need to have some knowledge about the process. Off the chance you do not know, you will have to seek help. Also, you must use this tutorial on a particular process.
  • You would know that you will lose all the data present on the device. So, it is a must that you create a backup of all the data for future use.
  • Also, you will have to download the tool file and the driver from an authenticated source. Make sure that you use the flash file according to the device that you are using.
  • Remember to keep your device charged completely or at least up to 70 percent so that you can use the device till the end of the process.

Steps to Install Intex Aqua Power Plus Flash File

To install the Intex Aqua Power Plus flash file, you will have to use the SP flash tool. Below we have mentioned all the steps that you will have to follow to install the flash file on the device. Read all the steps carefully and follow in the same way as mentioned.

  • To start with, you will have to download the Mediatek driver on your system. You will then have to start the installation process by clicking on the downloaded file. Follow all the instructions appearing on the screen to complete the installation process. In case you already have the driver on the system, skip the step.
  • Next, you will have to download the stock firmware for your device. It will download in the zip format, so, you will have to extract the contents of the file.
  • When done, you will have to download the SP flash tool on your system and then extract the contents of the tool file also.
  • Once done, you will have to open the extracted tool folder, and then you will have to click on the flash tool file. The tool window will open on the screen.
  • In the tool window, you will have to click on the scatter-loading option and the download agent option. You will then have to look for the scatter file in the Stock ROM of the device that you have downloaded.
  • You will then have to click on the preloader.bin option. It is a must to untick the check box because if you won’t, you will brick the device.
  • Now, you will have to click on the download option to begin the flashing process.
  • You will also have to turn off the device and then connect it to the system with the help of a USB cable. It is a must to press the volume up button so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will begin.
  • Wait for the process to complete. When the process will complete, you will get a green ring on the screen.
  • Finally, detach the cable and terminate the tool window.

Download Intex Aqua Power Plus Stock Firmware ROM (Flash File)

To use Intex Aqua Power Plus Flashing Tool, You must download and install WinRAR or 7Zip.

So, this is it. This was all you need to know about installing the Intex Aqua power plus flash file. The process, if followed in the same way, will surely help you to install the Intex Aqua Power Plus flash file easily. we hope that this article has helped you.

Leave a Comment