Intex Aqua Star 4G Firmware Stock ROM- Flash File

Intex Aqua Star 4G Flash FileIn case you are looking for the Intex Aqua star 4G flash file, this article will surely help you. We have mentioned how you can install the Intex Aqua star 4G flash file [Firmware Stock ROM] and provide you with the same. Read the article till the end to know more.

Requirements

Below we have mentioned all the things that you need to do before you can start the installation of the Intex Aqua Star 4G flash file.

  • To start with, you need to have some basic knowledge about the process. In case you are not aware, you will have to seek help from an expert.
  • Also, you need to use the device till the end of the process, so, you need to charge the device completely or at least up to 70 percent.
  • You will also lose all the data after the completion of the process, so, you need to create a backup of all the data available on the device.
  • Next, you need to download the tool file and firmware file according to the device that you are using. You will have to look for a compatible version of the driver file.
  • You need to scan all the files so that you can be sure that all the files are safe to use on the system.

Steps to Install Intex Aqua star 4G Flash File

In this section of the article, we have mentioned how you can proceed with the process. Below we have mentioned all the steps that you need to follow to install the Intex Aqua star 4G flash file (Stock Firmware ROM) on the device. Read all the steps properly and follow in the same way as mentioned.

  • The very first thing that you need to do is to download the Mediatek driver of the system. You will then have to click on the downloaded file to open the installation window. Follow all the steps instructions appearing on the screen to complete the installation process. In case the driver is already available on the system, skip the step.
  • Next, you will have to download the firmware file for your device. You will then have to extract the contents of the firmware file.
  • After this, you need to download the SP flash tool on the system. You will now have to extract the contents of the flash file.
  • Now, you need to open the extracted tool folder and then click on the flash tool file. The tool window will then open on the screen.
  • In the tool window, you need to click on the scatter-loading option and download agent option. The scatter file will be available in the stock ROM that you have extracted.
  • Next, you need to click on the preloader.bin option. You must do this because not doing so can brick the device.
  • After this, you will have to click on the download option to begin the flashing process.
  • Simultaneously, you need to turn off the device and then connect it to the system with the help of a USB cable. Also, you need to press the volume up button of the device so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will begin.
  • You will now have to wait for the process to complete. On completion, a green ring will appear on the screen.
  • You will have to detach the cable and terminate the tool window.

Download Intex Aqua Star 4G Stock Firmware ROM (Flash File)

To use Intex Aqua Star 4G Flashing Tool, You must download and install WinRAR or 7Zip.

So, this is it. This was the full process that you need to follow to install the Intex Aqua star 4G Stock Firmware ROM. All the information that you need to know before installing the Intex Aqua star 4G flash file is mentioned in the article. Hopefully, the article was helpful.

Leave a Reply