Itel A20 Firmware Stock ROM: Flash File for Itel Mobile

Itel A20 flash fileFlash files are developed and distributed by the manufacturer of the device only. You can easily find the device on the internet. You can use the flash file to fix common issues with your device like software issues, IMEI issues, boot loop issues, or dead issues. Also, if you have bricked the device, you can unbrick it with the help of a flash file. In this article, we are going to talk about the Itel A20 flash file. We have mentioned all the information that you need to know about the Itel A20 Firmware Stock ROM (flash file). Read the article till the end to know more about it.

Prerequisites

In this section of the article, we have mentioned a list of all the things that you will have to do to carry out the process easily. Read the list below.

  • First, you need to be aware that this process is valid only for a particular device. In case you use it for any other device, it can damage the device.
  • Also, you will have to download the flash file and the tool file from an authenticated source only. It is a must to download a suitable driver on the system.
  • You would know that post flashing, you will lose all the data available on the device. So, you will have to create a backup of all your data.
  • Other than this, you will have to charge the device completely or at least up to 60 percent so that you can use the device till the end of the process.
  • Lastly, you need to make sure that you are using a safe file on the system. For that, you will have to scan all the files before using them.

Steps to Install Itel A20 Flash File: Stock Firmware ROM

You will have to use the SPD upgrade tool if you want to install the Itel A20 flash file o the device. Now, in this section of the article, we have mentioned how you can install the flash file on the system. Read all the steps carefully and follow in the same way as mentioned.

  • To begin with, you will have to download the SPD driver on the system and then you will have to click on the downloaded file to open the installation window. You will now have to follow the on-screen instructions to complete the installation process. In case you already have it, skip the step.
  • Now, you will have to download the stock firmware device on the system. It will download in the zip format. You will have to extract the files from the firmware folder.
  • Next, you will have to download the SPD upgrade tool on the system and you will then have to extract the tool files only.
  • After that, in the tool folder, you will have to look for the upgrade download file and then click on it to open the tool window.
  • In the tool window, you will have to click on the load packet option. Now, you will have to redirect the tool to the location where you have stored the flash file.
  • After this, you will have to click on the start option. The flashing process will then start.
  • Now, you will have to wait for the process to complete. On completion, you will get an upgrade successful message will appear on the screen.
  • You will now have to detach the tool window and terminate the tool window.

Download Itel A20 Stock Firmware ROM (Flash File)

To use Itel A20 Flashing Tool, You must download and install WinRAR or 7Zip.

So, this was all you need to know about how to install the Itel A20 flash file on the device. We have tried to provide you all the information. We hope that this article was helpful to you.

Leave a Reply