Itel A45 Firmware Stock ROM: Flash File for Itel Mobile

In case you are looking for the itel A45 flash file, this article can be helpful to you. Here, we have mentioned different steps that you will have to follow to install the Itel A45 (Firmware Stock ROM) flash file on your device. We have tried to provide you with all the necessary information. Read the article till the end to know more about it.

Preliminary Preparations

Before you can proceed with installing the Itel A45 flash file, here are certain things that you will have to do so that you can carry out the process easily. Read the list of all the things below.

  • First, you will have to make sure that you have some knowledge about the process. In case you do not know, you will have to seek help.
  • Next, you will have to create a backup of all the data available on the device. It is a must that you do that because if you won’t, there are chances that you will lose the data after completion.
  • Other than this, you will have to charge the device completely or at least up to 60 percent so that you can use it till the completion of the process.
  • Also, you will have to make sure that you download the tool file and the driver file from an authenticated source only. You can look for a compatible driver on the internet.
  • Lastly, you need to scan all the files before using them on the system so that you can be sure that the file is safe to use on the system.

Steps to Install Itel A45 Flash File- Stock Firmware ROM

Now, we hope that you have fulfilled all the requirements that we have mentioned below, here is how you can install the Itel A45 flash file. We have mentioned the stepwise process that you need to follow. Go through the process properly and follow the steps in the same way as mentioned.

  • Initially, you will have to download the MediaTek driver on the system and then install it by following all the instructions appearing on the screen. In case you already have the driver on the system, skip the step.
  • Now, you will have to download the stock firmware file on the system and then you will have to extract the contents of the firmware file to another location.
  • When done, you will have to download the SP flash tool on the system and then you will have to extract the contents file also.
  • Now, in the extracted tool folder, you will have to click on the flash tool file and it will open the tool window for you.
  • Next, you will have to click on the scatter-loading option and the download agent option. You will then have to look for the scatter file in the stock ROM of the device.
  • When done, you will have to untick the option for the preloader.bin. You need to do it because not doing so can brick the device.
  • After that, you will have to turn off the device and then connect it to the system with the help of a USB cable. You need to press the volume up button of the device so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will start.
  • Wait for the process to complete. When the process will complete, you will see a green ring on the screen.
  • Finally, detach the cable and also, terminate the tool window.

Download Itel A45 Stock Firmware ROM (Flash File)

To use Itel A45 Flashing Tool, You must download and install WinRAR or 7Zip.

Now your device is flashed. This was the full stepwise process that you will have to follow to install the Itel A45 flash file on the system We hope that this helps.

Leave a Comment