Flash files are used to update the operating system of your device or install the existing or older one again. A firmware update is released by the company when they want to add new features to the device or get rid of issues that you are facing. To update the firmware, you need to install the flash file with the help of a flash tool. In this article, we are going to talk about Itel It 1520 Firmware Stock ROM: Flash File. We have mentioned how you can install the Itel IT1520 flash file using the SPD tool. Stay tuned to the article to know more about it.
Before you can start the flashing process, here is a list of all the things that you will have to keep in mind. These things will help you to carry out the process easily.
- First, you will have to make sure that you are aware of the technicalities. In case you are not aware, you will have to seek help.
- Also, you would know that you will lose all the data post flashing, so you need to create a backup so that you can use the data later.
- It is a must that you charge the device completely or at least up to 70 percent so that you can use the device till the end of the process.
- Other than this, you will have to download the tool file and the driver file compatible with the device. It is a must to look for a compatible firmware file.
- You will also have to scan all the files that you will download to be sure that they are safe to use on the system.
Steps to Install Itel IT1520 Flash File
After fulfilling all the requirements that we have mentioned in the above section of the article, you can proceed with the process. We have mentioned how you can install the Itel It1520 flash file on the device with the help of the SPD upgrade tool. Read the steps carefully and follow in the same way.
- First, you will have to download the SPD driver in your system. You will then have to click on the downloaded file and then you will have to follow all the instructions appearing on the screen to complete the installation process. In case you have the driver on the system, skip the step.
- Next, you will have to download the stock firmware file on the system. You will then have to extract the contents of the stock firmware file.
- When done, you will have to download the SPD upgrade tool on the system and then extract the contents of the tool file.
- In the extracted tool folder, you will have to look for the upgrade download file and then click on it to open the tool window for you.
- In the tool window, click on the load packet option and then you will have to redirect the tool to the location where you have stored the firmware file.
- Choose an appropriate firmware file and then you will have to open it.
- Now, after adding the file, you will have to click on the start option to begin the process.
- Wait for the process to complete. When the process will complete, you will see an upgrade successful message on the screen.
- You will then have to terminate the tool window and detach the cable.
Download Itel IT1502 Stock Firmware ROM (Flash File)
So, now your device is flashed. This was all you need to know about installing the Itel It1520 flash file on the device. We have tried to provide you with all the details that you need to know. Hopefully, the article was helpful.