Itel Wish it1407 Firmware Stock ROM- Flash File

Itel It 1407 Flash FileFlash files can be used to reinstall the operating system of the device. In this article, we have talked about the Itel Wish IT 1407 flash file. We have mentioned how you can install the Itel IT1407 Firmware Stock ROM with the help of the SPD upgrade tool. Read the article till the end to know more about it.

Preliminary Preparations

To carry out the process easier, we have mentioned a list of certain things that you will have to keep in mind or do before you can start the flashing process. Have a look at the list of all the things.

  • First, you need to make sure that you have certain knowledge about the process. In case you do not know, you will have to seek help. Also, you need to make sure that you are using the tutorial for a particular device only.
  • You would also know that you will lose all the data post flashing. So, you need to create a backup of all the data available on the device.
  • Also, you need to charge the device at least up to 70 percent so that you can use it till the end of the process.
  • It is a must that you download the tool file and driver file from an authenticated source and according to the device that you are using. You will have to look for the firmware file on the internet.
  • You must scan all the files before using them on the system to be sure that they are safe to use on the system.

Steps to install the Itel Wish IT1407 flash file

To install the Itel Wish IT 1407 flash file, you will have to use the SPD upgrade tool. Below we have mentioned all the steps that you will have to follow to install the Itel IT1407 flash file. Go through all the steps properly and follow in the same way as mentioned.

  • To start with, you will have to download the SPD driver on your system. You will then have to click on the downloaded file to begin the installation process. You will then have to follow all the instructions appearing on the system to complete the installation process. In case you have the driver on your system, you will have to skip the step.
  • Next, you will have to download the stock firmware file for your device. You will then have to click on the downloaded file and extract the contents of the stock firmware file.
  • After this, you will have to download the SPD upgrade tool on your system. You will then have to click on the downloaded file and extract the contents.
  • Now, you will have to open the extracted tool folder and then you will have to click on the upgrade download file. It will open the tool window for you.
  • You will then have to click on the load packet option and then redirect the tool to the location where you have stored the firmware file.
  • Choose an appropriate firmware file. Also, turn off the device and connect it to the system with the help of a USB cable.
  • After this, wait for the process to complete. When the process will complete, you will see an upgrade successful message on the screen.
  • You will then have to terminate the tool window and detach the cable.

Download Itel 1497 Stock Firmware ROM (Flash File)

To use Itel 1407 Flashing Tool, You must download and install WinRAR or 7Zip.

This is it. Now your device is flashed. This was all about installing the Itel IT1407 flash file on the device. We have provided you with all the required information that you need to know. We hope that the article was helpful to you.

Leave a Reply