You will have to use the flash file to install the operating system of your device again. Firmware update is released by the company when they have to fix common issues that you may face with the device or they have to add some new features to the device. You will have to download a unique firmware file for your device. In this article, we are going to talk about the Karbonn A90 flash file [Firmware Stock ROM]. We have provided you with the stepwise process that you need to follow to install the Karbonn A90 flash file on the device. Stay tuned to the article to know in detail.
To make the flashing process easier for you, we have mentioned a list of preliminary preparations that you need to do. Have a look at the list below.
- To start with, you need to have some basic knowledge about the process. If you are not aware of the process, you may have to consult an expert.
- Always remember that you need to use this tutorial for the specified device. You must do this because if you use it for any other device, the device can be damaged.
- You would know that you will lose all the data available on the device, so, you need to create a backup of all the data available.
- Next, you will have to charge the device completely or at least up to 70 percent because you need to use the device till the end of the process.
- Also, you need to download the tool file and firmware file according to the device that you are using. You will also have to look for a compatible driver file.
- It is a must to scan all the files so that you can be sure that you are using a safe file on the system.
Steps to Install Karbonn A90 Flash File
Hopefully, you have read and completed all the preliminary preparations that we have mentioned in the above section. You can now proceed with the process. Below we have mentioned all the steps that you need to follow to install the Karbonn A90 flash file. Read all the steps carefully and follow in the same way as mentioned.
- To start with, you will have to download the SPD driver on the system. Now, you need to click on the downloaded file and start the installation window. You will now have to follow all the instructions appearing on the screen to complete the installation process. In case the driver is already present on the system, skip the step.
- Next, you will have to download the firmware file for your device. You need to then extract the contents of the file.
- After this, you will have to download the SPD upgrade tool on the system and you will have to extract the contents of the tool file.
- Now, you need to open the extracted tool folder and then click on the upgrade download file. The tool window will open on the screen.
- You will now have to click on the load packet option. You will now have to redirect the tool to the location where you have extracted the firmware file.
- Now, you need to turn off the device and then connect it to the system with the help of a USB cable.
- After this, you will have to click on the start option to start the process.
- Wait for the process to complete. When the process will complete, you will get an upgrade successful message on the screen.
- Finally, detach the cable and terminate the tool window.
Download Karbonn A90 Firmware Stock ROM (Flash File)
So, now you have successfully installed the Karbonn A90 Stock Firmware. We have mentioned all the information that you need to know about installing the Karbonn A90 flash file. Hopefully, the article was helpful.