Karbonn K9 Viraat 4G Firmware Stock ROM- Flash File

Karbonn K9 Viraat 4G Flash FileIn case you are looking for the Karbonn K9 Viraat 4G flash file, this article will surely help you. Here is how you can install the Karbonn K9 viraat flash file / Firmware Stock ROM on the system. Stay tuned to the article to know more.

Things to Keep in Mind

In this section of the article, we have mentioned a list of certain things that you need to do before you can start the Karbonn K9 viraat flash file. These things will help you to complete the installation process easily.

  • First, you need to have some basic knowledge about the process. In case you are not aware of the process, you need to seek help from an expert.
  • After this, you need to download the firmware file and tool file from an authenticated source. Also, you need to look for the driver file compatible with the device.
  • It is a must to scan all the files that you will download to be sure that all the files are safe to use on the system.
  • Next, you need to charge the device completely or at least up to 70 percent so that you can use the device till the end of the process.
  • You will also have to create a backup of all the data because if you won’t, you will lose all the data after the completion of the flashing process.

Steps to Install Karbonn K9 4G Viraat Flash File

Hopefully, you have read and fulfilled all the requirements that we have mentioned in the above section of the article. You can now proceed with the process. Below we have mentioned all the steps that you need to follow to install the Karbonn K9 viraat flash file. Read all the steps carefully and follow in the same way as mentioned.

  • First, you need to download the MediaTek driver on the system and then click on the downloaded file to open the installation window. Follow all the instructions appearing on the screen to complete the installation process. In case the driver is available on the system, skip the step.
  • Next, you will have to download the stock firmware file for your device. You will then have to extract the contents of the stock firmware file.
  • After this, you need to download the SP flash tool on the system and then extract the contents of the flash tool.
  • You will now have to open the extracted tool folder and then click on the flash tool file. The tool window will then open on the screen.
  • Now, you need to click on the scatter-loading option and download agent option. The scatter file will be available in the stock ROM that you have downloaded.
  • You need to then click on the preloader.bin option. It is a must to do this because if you won’t, you can brick the device.
  • Next, you need to click on the download option so that the process can start.
  • You will also have to turn off the device and then connect it to the system with the help of a USB cable. Also, you need to press the volume up button of the device so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will begin.
  • Wait for the process to complete. On completion, a green ring will appear on the screen.
  • You need to finally detach the cable and terminate the tool window.

Download Karbonn K9 Viraat 4G Stock Firmware ROM (Flash File)

To use Karbonn K9 Viraat Flashing Tool, You must download and install WinRAR or 7Zip.

This is it. This was all you need to know about installing the Karbonn K9 viraat 4G flash file. All the information that you need to know about installing the Karbonn K9 viraat 4G Stock Firmware ROM file is mentioned in the article. We hope that the article was helpful.

Leave a Reply