Flash files can be helpful when you have to get rid of all the issues that you are facing with the device. Also, the flash files can be helpful when you have to upgrade or downgrade the dice. In this article, we are going to talk about the Lava A77 flash file. We have mentioned how you can install the Lava A77 flash file. Read the article till the end to know more about it.
Points to Remember
Below we have mentioned all the things that you will have to do so that you can carry out the process easily. You will have to keep these things in mind at the time of carrying out the process.
- First, you need to have some basic knowledge about the process. In case you are not aware of the technicalities, you will have to consult an expert. It is a must that you use the tutorial for a particular device only.
- Also, you would know that you will lose all the data post flashing. So, you need to create a backup of the data.
- It is a must to charge the device completely or at least up to 70 percent so that you can use it till the end of the process.
- You will also have to download the required files and tool files according to the device that you are using. Look for a compatible driver file on the internet.
- Lastly, you need to scan all the files so that you be sure that these files are safe to use on the system.
Steps to Install Lava A77 Flash File
Now that you have fulfilled all the requirements that we have mentioned in the above section of the article, here is how you can proceed with the process. Below we have mentioned all the steps that you will have to follow to install the Lava A77 flash file. Go through all the steps properly and follow in the same way as mentioned.
- First, you will have to download the SPD driver on your system. Now, you will have to click on the downloaded file to start the installation process. Follow all the instructions appearing on the screen to complete the installation process. If you already have the driver on your system, skip the step.
- Next, you will have to download the stock firmware file for your device. It will download in the zip format. You will have to extract the contents of the firmware file.
- Once done, you will have to download the SPD upgrade tool on your system. You will have to extract the contents of the SPD upgrade tool also.
- You will now have to open the extracted tool folder and then click on the upgrade download file. It will open the tool window for you.
- Now, in the tool window, you will have to click on the load packet option. You will have to now redirect the tool to the location where you have stored the firmware file.
- You will now have to select the correct firmware file.
- Turn off the device and connect it with your system with the help of a USB cable.
- Now, click on the start option so that the process can begin. Wait for the process to complete.
- When the process will complete, you will see a successful message on the screen.
- Terminate the tool window and detach the cable.
Download Lava A77 Stock Firmware ROM- Flash File
Now your device is flashed. This was the full stepwise process that you have to follow to install the Lava A77 flash file on the device. We have mentioned all the details that you will have to know. We hope that the article was helpful for you.