Lava Iris 405 Plus Firmware Stock ROM- Flash File

Lava Iris 405 plus Flash FileIn case you are looking for the Lava Iris 405+ flash file, this article was helpful for you. We have mentioned how you can install the Lava Iris 405 Plus flash file (Firmware Stock ROM) and provided it with the original file. Stay tuned to the article to know more about it.

Preliminary Preparations

Now, in this section of the article, we have mentioned a list of all the things that you need to do so that you can carry out the process easily.

  • To start with, you need to have some basic knowledge about the process. In case you are not aware, you will have to seek help from an expert.
  • Also, you need to know that you can lose all the data available on the device. So, you need to create a backup of all the data available on the device.
  • Next, you need to charge the device completely or at least up to 60 percent so that you can use the device till the end of the process.
  • You will also have to download the latest version of the tool file and driver file. You will also have to download the file from an authenticated source.
  • It is a must to scan all the files that you will download to be sure that all the files are safe to use on the system.

Steps to Install Lava Iris 405 Plus Flash File

You will have to use the SP flash tool to install the Lava Iris 405 Plus flash file. Here is how you can do it. Below we have mentioned all the steps that you need to follow to install the Lava Iris 405 plus Stock Firmware ROM on the device. Read all the steps carefully and follow all the steps in the same way as mentioned.

  • To start with, you will have to download the Mediatek driver on the system. You will now have to click on the downloaded file and open the tool window for you. Now, complete the installation process by following all the steps appearing on the screen. If the driver is already available on the system, skip the step.
  • Next, you need to download the stock firmware file for the device. You will now have to extract the contents of the firmware file.
  • Next, you need to download the SP flash tool on the system and extract the contents of the tool files also.
  • Once done, open the extracted tool folder and then click on the flash tool file to open the tool window on the screen.
  • In the tool window, you need to click on the scatter-loading option and download agent option. The scatter file will be available on the stock ROM that you have extracted.
  • After this, you need to untick the checkbox for preloader.bin. It is a must to do because if you won’t, you can end up bricking the device.
  • Once done, you need to click on the download agent option to begin the process.
  • After this, you need to turn off the device and connect the device to the system with the help of a USB cable. Also, press the volume up button of the device so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will begin.
  • Wait for the process to complete. When the process will complete, you will get a green ring on the screen.
  • Now, you need to remove the cable and close the tool window.

Download Lava Iris 405 Plus Stock Firmware ROM (Flash File)

To use Lava Iris 405 Plus Flashing Tool, You must download and install WinRAR or 7Zip.

So, now you have successfully installed the Lava Iris 405+ flash file. All the information that you need to know about installing the Lava Iris 405 plus Stock Firmware ROM is mentioned in the article. We hope that the article was helpful.

Leave a Reply