Lenovo C2 K10a40 Firmware Stock ROM- Flash File

In case you are looking for a Lenovo C2 K10A40 flash file, this article can be helpful for you. You will have to use the SP flash tool to install a flash file on the system. We have mentioned how you can install the Lenovo K10A40 firmware stock ROM on the device. Stay tuned to the article to know more about it.

Preliminary Preparations

Below we have mentioned all the things that you will have to keep in mind while carrying out the process. Read the list of all the things below.

  • The very basic thing that you need to do is to have some knowledge about the process. Off the chance you do not know, you will have to seek help.
  • You must know that you will lose all the data present on the device after the completion of the flashing process, so, you need to create a backup of all the data.
  • After this, you will have to make sure that you charge the device completely or at least up to 60 percent so that you can use it till the completion of the process.
  • Also, you need to download the firmware file and the tool file according to the device that you are using. Look for compatible drivers on the internet.
  • Lastly, you need to scan all the files before using them on the system to be sure that they are safe to use on the system.

Steps to Install Lenovo C2 K10A40 Flash File

Below we have mentioned all the steps that you will have to follow to install the Lenovo K10A40 flash file on the device. You will have to use the SP flash tool for the same. Read all the steps carefully and follow the same way as mentioned.

  • To start with, you will have to download the Mediatek driver on the system and then you will have to click on the downloaded file to open the installation window. Follow all the instructions appearing on the screen to complete the installation process. In case you have the driver on the system, skip the step.
  • Next, you will have to download the firmware file for your device. You will then have to extract all the files.
  • When done. You will have to install the SP flash tool on the system and then extract the tool files also.
  • Now, you will have to open the extracted tool folder and then look for the flash tool file. Click on it and the tool window will open up.
  • In the tool window, you will have to click on the download agent option and scatter-loading option. The scatter file will be present in the stock ROM.
  • Now, you will have to untick the option for preloader.bin. It is a must to do because if you don’t, there are chances that you will brick the device.
  • After this, you will have to click on the download option to begin the flashing process.
  • Once done, you will have to turn off the device and press the volume up button of the device so that the tool can detect the device. Connect the device with the system with the help of a USB cable.
  • Now, when the tool will detect the device, the flashing process will start.
  • Wait for the process to complete. When it will complete, you will get a green ring on the screen.
  • You will then have to terminate the tool window and detach the cable.

Download Lenovo K10A40 C2 Stock Firmware ROM- Flash File

To use Lenovo C2 Flashing Tool, You must download and install WinRAR or 7Zip.

So, now your device is flashed. This was all about installing the Lenovo K10A40 flash file on the device. We have tried to provide you with all the necessary information. We hope that the article was helpful to you.

Leave a Comment