Flash files can be used for many purposes. You can use the flash file to get rid of common issues that you may face with your device or you can use it to downgrade or upgrade the device. Other than this, it can help unbrick the device if you have bricked it. It is easy to install a flash file on the device. You will have to use a flash tool for it. In this article, we are going to talk about the Lenovo P2 flash file. We have mentioned how you can install the Lenovo P2 (Firmware Stock ROM) flash file on the system. Read the article till the end to know more.
Below we have mentioned a list of certain things that you will have to do before you can install the Lenovo P2 flash file on the system. Read the list of all the things below.
- To begin with, you need to have some basic knowledge about the process. In case you do not know, you can seek help.
- Also, you would know that you will lose all the data available on the device post flashing. So, you will have to create a backup of all the data available on the device.
- It is a must that you charge the device completely or at least up to 60 percent so that you can use it till the end of the process.
- Other than this, we will advise you to download the tool file and the firmware file from an authenticated source only.
Steps to Install Lenovo P2 Flash File
To install the Lenovo P2 flash file, you will have to use the Lenovo downloader tool. Below we have mentioned all the steps that you will have to follow to install the flash file on the system. Read the steps carefully and follow in the same way as mentioned.
- To begin with, you will have to download the Qualcomm USB driver on the system. You will then have to install it on the system by following all the instructions appearing on the system. If you already have the driver on the system, skip the step.
- Next, you will have to download the stock firmware file for your system. You will then have to extract the contents of the file for later use.
- When done, you will have to download the Lenovo downloader tool on the system and then you will have to extract the tool files also.
- In the extracted tool folder, you will have to click on the QcomDloader.exe file to open the tool window for you.
- Once done, in the tool window, you will have to click on the load option. You will now have to redirect the tool to the location where you have stored the flash file.
- After that, you will have to click on the start button to begin the flashing process.
- Also, you will have to switch off the device and then you will have to press the volume up and down button. Keep holding it and then connect it to the system.
- You will now have to wait for the tool to detect the device. When it will detect the device, the process of flashing will begin.
- Wait for the process to begin. When the process will complete, you will see a successful message on the screen.
- You will now have to terminate the tool window and also, detach the cable.
Download Lenovo P2 P2a42 Stock Firmware ROM (Flash File)
You can now start the device. This was all about how you can install the Lenovo P2 P2a42 flash file on the system. Following all the steps, in the same way, will help you to carry out the process easily. We hope that the article has helped you.