LYF LS 5020 Stock ROM Firmware: Flash File

LYF LS 5020 Flash FileIn case you are looking for the LYF Water 10 LS 5020 flash file, this is the right place for you. In this article, we have mentioned all the steps that you will have to follow to install the LYF LS 5020 flash file (Firmware Stock ROM). Read the article till the end to know more.

Things to remember

Below we have mentioned all the things that you need to do before you can start the process. Read all the things below and make sure that you have them before starting the process.

  1. You will first have to be aware of all the technicalities. This is a must and if you are not aware, you can consult an expert.
  2. Also, you will have to charge your device at least up to 60 percent so that you can use the device till the end of the process.
  3. You will also have to create a backup of all your data. It is a must that you create a backup because post flashing you will lose all the data.
  4. Other than this, you will have to make sure that you download the latest version of the tool on the system and the driver.

Steps to install LYF LS 5020 Flash File

To install the LYF LS 5020 (Water 10) flash file (Firmware Tool), you will have to use the SP flash tool on the system. We have mentioned all the steps that you will have to follow to install the flash file on the system. Read the steps carefully and follow them in the same way as mentioned.

  1. First, you will have to download the MediaTek driver on the system. You will then have to install the flash tool on the system by following all the instructions appearing on the screen. Skip the step in case you already have it on the system.
  2. You will then have to download the firmware file on the system. You can get the firmware file easily on the internet. After downloading it on the system, you will have to extract the contents of the file.
  3. Now, you will have to download the SP flash tool on your system and extract the contents of the tool file also.
  4. Once done, you will have to open the tool folder, and then you will have to click on the flash tool file to start the flashing process.
  5. You will then have to click on the scatter-loading option and then on the download agent option. You can look for the scatter file in the stock ROM of the device.
  6. Now, you will have to click on the preloader.bin option. You must do it because if you won’t, there are chances that you will lose all your data after the completion of the process.
  7. You will then have to turn off the device and then you will have to connect the device and the system using the USB cable. Now, you will have to press the volume up button of the device so that the tool can detect the device.
  8. Now, when the tool will detect the device, the process of flashing will start. You will then have to wait for the process to complete.
  9. Once the process will complete, you will see a green ring on the screen. You will then have to end the tool window and then you will have to disconnect the device and the system.

Download Lyf Water 10 LS5020 Stock ROM Firmware (Flash File)

Now, these were all the steps that you will have to follow to install the LYF LS 5020 flash file. Following all the steps in the same way as mentioned will help you to install the flash file easily. Hopefully, the article will help you.

Leave a Reply