LYF Wind 5 LS-5013 Firmware Stock ROM- Flash File

LYF Wind 5 Flash FileFacing issues with your LYF device or want to upgrade the device, consider installing the flash file. In this article, we have talked about the LYF Wind 5 LS-5013 flash file. We have mentioned how you can install the LYF LS-5013 flash file / Firmware Stock ROM on your device with the help of the SP flash tool. Stay tuned to the article to know more.

Requirements

Now, to carry out the process easier, here are certain things that you will have to keep in mind while you carry out the process or start the process. Read the list below.

  • First, you will have to make sure that you are aware of the basic technicalities. In case you are not aware, skip the step. Also, make sure that you use the tutorial for a particular device only.
  • Next, you would know that you will lose all the data post flashing, so, it is a must that you create a backup of all the data available on the device.
  • You will have to charge the device completely or at least up to 60 percent so that you can use it till the end of the process.
  • Other than this, you will have to make sure that you download the tool file and the firmware file according to the device that you are using. You can look for the compatible version of the driver.
  • Before using all the files on the system, it is a must to scan all the files to be sure that they are safe to use.

Steps to Install LYF WIND 5 LS-5013 Flash File

In this section of the article, we have mentioned how you can install the LYF LS 5013 flash file. Read all the steps carefully and follow the process in the same way as mentioned.

  • First, you will have to download the MediaTek driver on the system. You will then have to click on the downloaded file and open the installation window. Follow all the instructions appearing on the screen to complete the installation process. In case you already have the driver, skip the step.
  • Also, you will have to download the stock firmware file for the device. You will have to extract all the contents of the stock firmware file.
  • Now, you will have to download the SP flash tool on the system and extract the tool contents also.
  • Once done, you will have to open the extracted tool folder and then click on the flash tool file. It will open the tool window for you.
  • In the tool window, you will have to click on the download agent option and the scatter-loading option. The scatter file will be available in the stock ROM of the device.
  • Now, you will have to untick the checkbox for preloader.bin. It is a must to do that because if you won’t, there are chances that you will brick the device.
  • Next, you will have to click on the download option to begin the flashing process.
  • Simultaneously, you will have to turn off the device and then connect it to the system. You will have to press the volume up button so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will start.
  • Wait for it to complete. On completion, you will see a green ring on the screen.
  • Finally, detach the cable and terminate the tool window for you.

Download LYF WIND 5 LS-5013 Stock Firmware ROM: Flash File

To use LYF WIND 5 Flashing Tool, You must download and install WinRAR or 7Zip.

So, this is it. These were all the steps that you will have to follow to install the LYF LS5013 flash file. Following all the steps, in the same way, will help you to carry out the process easily. We hope that this article has helped you.

Leave a Reply