Mi 4i 2015015 Flash File- Stock ROM Firmware Download

Mi 4i 2015015  romFlash files can be helpful to you in many ways. It can help you to downgrade your device to the factory version like you bought it or it can help you to upgrade it to the latest version. Other than this, flashing can help you to resolve different issues that you can resolve with your device. In case you are facing software issues, lag issues, boot loop issues, dead issues, you can easily flash your device and resolve all those issues. Other than this, if you are facing the application stopped working issue frequently, you can consider flashing your device. In this article, we have talked about the Mi 2015015 flash file. We have mentioned how you can use the Xiaomi Flash tool to install the Mi 2015015 Flash File. Read the article till the end to know the procedure.

Requirements

Now, before you start the process, you need to have certain things on your device. Make sure that you fulfill all the requirements and then only proceed with the process. Read the list of all the things below.

  1. You first need to be aware of all the technicalities. Off the chance you are not aware, you may have to seek help from an expert.
  2. Also, you will have to charge your device completely or at least up to 70 percent so that the device can work will the end of the process.
  3. You will also have to create a backup of all the important data. It is a must because, after the completion of the flashing process, you will lose all your data. so, it is the best option to create a backup.
  4. After this, you also need to make sure that you have downloaded the recent version of the driver and the tool that you will use in the process. If your driver and the tool are incompatible, the process may be difficult for you.
  5. Moreover, you need to scan your files before you install them on your system to be sure that it is safe to use on the system.

Step to use the Mi 2015015 Flash File

We hope that you have fulfilled all the requirements that we have mentioned in the above section of the article. Now, you will have to follow all the steps that we have mentioned below to install theĀ Mi 2015015 Flash File. make sure that you follow all the steps in the same order as mentioned.

  1. You will first have to get the USB driver on your system. You will have to download it on your system. Once downloaded, you will have to follow the instructions appearing on the screen to install the driver.
  2. Next, you will have to download the Xiaomi tool on your system. You will then have to extract the files of the tool to a new folder. mi 2015015 flash file
  3. Now, you will have to open the tool folder. You will then have to click on the installation file to start the installation process. Follow the instructions appearing on the screen to complete the installation process.
  4. Once done, you will have to download the firmware file for your device from the internet. You will have to extract the contents of the firmware file to another folder.
  5. After this, you will have to switch off your device and then connect it to the system using the USB cable.
  6. Now, you will have to boot your device into download mode. You will have to press the Volume down button and the power button to boot it into download mode.
  7. Once done, you will have to open the tool window. You can look for it from the start menu. mi 2015015 flash file download
  8. Now, in the tool window, you will have to look for the select option. You will then have to redirect the tool to the location where you have stored your firmware.
  9. Now, you will have to click on the flash option to start the flashing process. Mi 2015015 stock firmware
  10. Wait for the process to complete. Once it will complete, you will have to detach your cable and also close the tool window.

This was all you need to know about the Mi 2015015 Flash File. We hope that this article will help you to install the Mi 2015015 Flash File. We hope it was informative for you.

 

Leave a Comment