Micromax A069 Flash File- Stock Firmware ROM

If you are looking for how you can use the Micromax A069 flash file, here is all you need to know. We have mentioned how you can install the Micromax A069 flash file. Read this article till the end to know more about how to use the flash file.micromax-a069 flash file

Points to Remember

In this section of this article, we have mentioned all the things that you need on your system before you start the flashing process. Make sure that you fulfill all the requirements and then only proceed with the process.

  1. First, you need to make sure that you are aware of some technicalities. In case you’re not aware, you need to consult an expert.
  2. Secondly, you will have to create a backup of all your data. We highly advise you to do so because if you won’t create a backup, there are high chances that you will lose your data.
  3. You will also have to charge your device to at least 70 percent.
  4. Other than this, you will have to make sure that you are using an authenticated version of the driver and the tool that you will use in the process.

Steps to use the Micromax A069 Flash File

Now, we hope that you have read and fulfilled all the requirements that you have to fulfill in the above section of the article. You can now proceed with the process. We have Mentioned a full stepwise process that you will have to follow to use the Micromax A069 flash file using the SP Flash Tool. Make sure you follow the steps in the same order as we have mentioned. Read the steps carefully.

  1. The first step in the process is to download the Meditek Driver installer on your system. You will then have to click on the downloaded file to install it on your system. Complete the installation process according to the instructions appearing on the screen.
  2. You will then have to download the firmware for your device. The firmware is easily available on the internet and you can download it. Extract the files of the firmware to a new folder.
  3. Once done, you will have to download the SP flash tool. Then, you will have to extract the files of the tool also.
  4. Now, you will have to open the tool window and look for the flash_tool file. You will then have to click on it to start the tool. Micromax A069 flash file
  5. Once done, you will have to click on the download-agent option and the scatter-loading option. You will have to find the scatter file in the Stock ROM Firmware of your device. Micromax A069 stock firmware download
  6. After this, you will have to untick the option for the preloader.bin. It is a must to do because if you won’t, there are high chances that you will brick your device.
  7. Once done, you will have to click on the download option to start the flashing process. Micromax A069 flash file download
  8. You will then have to switch off your device and simultaneously, you will have to connect your device and the system. Also, press the volume UP button of your device so that the tool can detect your device.
  9. Once the tool will detect your device, the process of flashing will start.
  10. Now, you will have to wait for the process to complete. Once it will complete, you will see a green ring on the screen.
  11. Finally, you will have to disconnect the device and the system and also, terminate the tool window.

Finally, the process is now complete. We hope that this article will help you to use the Micromax A069 flash file on your device. We hope that this article will help you.

Leave a Reply