In case you have bricked your device, you can fix it by flashing the device. Flash files can be very helpful when it comes to upgrading the device to the latest version or downgrading it to the factory version. They contain the operating system of your device in the original form. Also, you can fix common issues that you face with the device by installing a flash file / Firmware Stock ROM on the device. In this article, we are going to talk about the Micromax A121 flash file. We have mentioned how you can install the Micromax Canvas Elanza 2 A121 flash file on the device. Read the article till the end to know more about it.
Here is the list of all the things that you will have to do before you can start the flashing process. It will make the process easier for you.
- Initially, you will have to make sure that you are aware of the technicalities. In case you are not aware, you will have to seek help. Also, the tutorial applies to a particular device only.
- Also, you would know that post flashing, you will lose all the data available on the device. So, you need to create a backup of the data so that you can use it later.
- Moreover, you need to charge the device completely or at least up to 70 percent so that you can use it till the end of the process.
- It is a must that you download the flash file and the tool file from an authenticated source. You can check for compatible drivers on the internet.
- Lastly, you will also have to scan all the files before using them on the system. It is important to be sure that you are using a safe file on the system.
Steps to Install the Micromax Canvas Elanza 2 A121 Flash File
Now we hope that you have fulfilled all the requirements that we have mentioned in the above section of the article, here is how you can install the Micromax A121 flash file on the device. Read the steps properly and follow in the same way as mentioned.
- To begin with, you will have to download a compatible driver on the system. You will have to then install the driver on the system by clicking on the downloaded file. If you have the driver on the system, skip the step.
- Next, you will have to download the stock firmware file on the system and then extract the contents of the files.
- When done, from the package that you have downloaded, you will have to click on the tool file and then install the required tool also.
- Now, you will have to open the tool file and follow all the instructions appearing on the device to complete the flashing process.
- When the flashing process will complete, you will have to end the tool window and detach the cable.
Download Micromax A121 Stock Firmware ROM: Flash File
This was how you can install the Micromax A121 flash file on the device. We have mentioned all the necessary information that you need to know. We hope that you have found the article helpful.