Micromax A96 Stock Firmware ROM: Flash File

Micromax A96 Firmware ROMIn case you are looking for the Micromax A96 flash file, this is the right article for you. We have mentioned all the steps that you will have to follow to install the flash file using the SP flash tool. We have tried to provide you with all the necessary information that you need on the system. Read the article to know more.

Requirements

In this section of the article, we have mentioned all the things that you need on your system before you can start the process. Read the list of all the things below.

  1. First, you need to have some basic knowledge about the process. In case you are not aware, you will have to seek advice from an expert.
  2. Secondly, you will have to charge your device completely or at least up to 70 percent so that you can use it till the end of the process.
  3. After this, you also need to create a backup of your data. It is a must because if you won’t, you will lose all your data after the completion of the process.
  4. Other than this, you will have to make sure that you have downloaded the latest and compatible version of the tool that you will have to use in the process.

Steps to Install Micromax A96 Flash File

You will have to use the SP flash tool to install the Micromax A96 flash file and in this section, we have mentioned the steps for the same. Read the steps carefully and follow them in the same way as we have mentioned.

  1. Initially, you will have to download the mediatek (MTK) driver on your system. You will then have to follow the instructions appearing on the screen to complete the flashing process. In case you already have it on your system, you may skip this step.
  2. After this, you will have to download the firmware file on your system according to the device you are using. It will download in the zip format and you will have to extract the contents of the file.
  3. Once done, you will have to download the SP flash tool on your system, and then you will have to extract the contents also.
  4. Now, you will have to open the extracted tool folder and look for the flash tool file. It will open the tool window for you.
  5. You will then have to click on the scatter-loading option and the download agent option. Look for the scatter file in the stock ROM of your device.
  6. Now, you will have to click on the preloader.bin option. You must do it because if you won’t, there are chances that it will brick your device.
  7. Once done, you will have to click on the download option to begin the process.
  8. Now, you will have to connect the device with the system using a USB cable. You will have to make sure that you have turned off the device. After that, you will have to press the volume up button of your device so that the tool can detect the device.
  9. When it will detect the device, the process of flashing will start.
  10. Now, you will have to wait for the process to complete, and on completion, you will see a green ring on the screen.
  11. After that, you will have to terminate the tool window and also, detach the system and the device.

Download Micromax A96 Firmware ROM (Flash File)

So, now your device is flashed. You can now restart the device. This was the full stepwise process that you will have to follow to install the Micromax A96 flash file on the system. Hopefully, the article has helped you.

Leave a Reply