Micromax Bolt A064 Stock Firmware ROM: Flash File

Micromax Bolt A064 Flash FileSometimes, you may face different issues with your Micromax device that you need to fix for the better functioning of the device. To fix some of the issues, you can use flash files. Moreover, if you have bricked your device, you can unbrick it with the help of the flash file. In this article, we have explained to you how you can use the Micromax Bolt A069 flash file on your system. We have mentioned the stepwise process that you will have to follow to install the flash file using the SPD tool. Read the article to know more about how to install the Micromax A069 firmware Stock ROM.

Preliminary preparations

Before you can start the process, it is important that you get certain things on your system. It is a must so that you can carry out the process easily.

  1. You need to have some basic knowledge about the technicalities. In case you are not aware of the technicalities, you can consult an expert.
  2. Other than this, you will have to charge your device completely so that you can use it till the end of the process.
  3. Also, you would know that after post flashing, all the data present on your device will vanish. So, it is a must that you create a backup of the data.
  4. You also need to make sure that you download the SPD tool and the driver from an authenticated source. Make sure that you use the compatible version of the tool only.
  5. Lastly, you will have to make sure that you scan all the files so that you can be sure that the files are safe to use on the system.

Steps to Install Micromax A064 Flash File

In this section of the article, we have mentioned all the steps that you will have to follow to install the Micromax A064 flash file with the help of the SPD tool. Pursue the process according to the steps that we have mentioned below.

  1. Initially, you will have to download the SPD upgrade tool on your system. You will then have to complete the installation process by following all the instructions appearing on the screen. In case you already have it on your system, skip this step.
  2. After that, you will have to download the firmware file for your device. Look for the appropriate file. You will then have to extract the contents of the file.
  3. Once done, you will have to download the SPD upgrade tool on your system and then extract the files of the tool also.
  4. Open the extracted tool folder. You will have to look for the Upgrade download file and then click on it to open the tool window.
  5. Once done, you will have to click on the load packet option in the tool window.
  6. You will then have to redirect the tool to the location where you have stored the firmware file. You will then have to select the .mbn extension file from the list.
  7. After this, you will have to turn off your device and then you will have to connect the device and the system using the USB cable.
  8. When done, you will have to click on the start download option and the process of flashing will begin.
  9. Once done, you will have to wait for the process to complete. When it will complete, you will see an upgrade successful message on the screen.
  10. You will then have to disconnect the device and the system and also, end the tool window.

Download Micromax A064 Stock Firmware ROM (Flash File)

Now, you can restart your device and your device is flashed. Following all the steps in the same way as we have mentioned will help you to install the Micromax A064flash file. Hopefully, you have found the article helpful.

Leave a Reply