Micromax Bolt A47 Firmware Stock ROM- Flash File

Micromax A47 Flash FileOff the chance you are looking for the Micromax Bolt A47 flash file, this is the right article for you. We have mentioned how you can install the Micromax A47 flash file / Firmware Stock ROM with the help of the SP flash tool. Stay tuned to the article till the end to know more about it.

Requirements

Below we have mentioned all the things that you will need to do so that you can carry out the process easily. Read all the things below.

  • Initially, you will need to have some basic knowledge about the process. Off the chance you do not know, you will have to seek help.
  • Also, you will have to download the flash tool and the firmware file according to the device. You will also have to look for a driver on the internet.
  • You would know that you will lose all the data available on the device. So, you must create a backup of the data available on the device.
  • Next, you will have to charge the device up to 70 percent so that you can use the device till the end of the process.
  • Lastly, you will have to scan all the files so that you can be sure that they are safe to use on the system.

Steps to install Micromax Bolt A47 Flash File

Now that you have fulfilled all the requirements that we have mentioned in the above section of the article, here is how you can proceed. We have mentioned certain steps that you will have to follow to install the Micromax A47 flash file (Stock Firmware ROM). Read the steps carefully and follow in the same way as mentioned.

  • To start with, you will have to download the MediaTek driver on your system. You will then have to click on the downloaded file and then follow all the instructions appearing on the screen to complete the installation process. In case you have the driver on the system, skip this step.
  • Next, you will have to download the stock firmware file on your system and then you will have to extract all the contents of the firmware file.
  • After this, you will have to download the SP flash tool on the system. You will then have to extract all the contents of the tool file.
  • Now, you will have to open the extracted tool folder and then you will have to click on the flash tool file. It will then open the tool window for you.
  • In the tool window, you will have to click on the scatter-loading option and download agent option. You will then have to look for the scatter file in the stock ROM that you have downloaded.
  • Also, you will have to click on the preloader.bin option. You will need to do this because if you won’t, there are chances that you will brick the data.
  • Once done, you will have to click on the download option to start the flashing process.
  • Next, you will have to turn off the device and then you will have to connect the device with the system. Also, you will have to press the volume up button of the device so that the tool can detect it.
  • Once the tool will detect it, the process of flashing will begin.
  • You will then have to wait for the process to complete. When the process will complete, you will get a green ring on the screen.
  • Finally, detach the cable and terminate the tool window.

Download Micromax A47 Stock Firmware ROM (Flash File)

To use Micromax A47 Flashing Tool, You must download and install WinRAR or 7Zip.

This is it. This was all you need to know about the Micromax A47 flash file. Following all the steps, in the same way, will help you to complete the process easily.

Leave a Comment