Micromax Bolt A62 Firmware Stock ROM- Flash File

Micromax A62 Flash FileYou can use the flash files for many reasons. The flash files can help you when you have to get rid of the issues that you are facing with the device. You can fix issues like IMEI issues, boot loop issues, software issues, and dead issues. Other than this, if you have bricked your device, you can fix it by installing the flash file. Also, you can downgrade your device to the factory version or upgrade it to the latest version with the help of a flash file. A flash file is different for different models of mobiles. In this article, we have emphasized the Micromax A62 flash file (Firmware Stock ROM). We have mentioned how you can install the Micromax Bolt A62 flash file. Read the article till the end to know more about it.

Requirements

Before you can start the flashing process, here is a list of certain things that you will have to do. These things will help you to carry out the process easily.

  • To start with, you will have to be aware of the technicalities. In case you are not aware of the technicalities, you will have to consult an expert.
  • Always remember that you need to use this tutorial for a particular device only. If you use it on any other device, your device can be damaged.
  • Also, you will have to create a backup of all the data available on the device. You must do this because all the data will vanish from the device.
  • Next, you will have to charge the device completely or at least up to 70 percent. This is because you will have to use the device till the completion of the process.
  • Always download the tool file and the firmware file according to the device that you are using. Make sure that you download a compatible driver file also.
  • Lastly, you will have to scan all the files before using them.

Steps to Install Micromax A62 Flash File

In this section of the article, we have mentioned how you can begin the process. Below we have mentioned all the steps that you will have to follow to install the Micromax A62 flash file. Read all the steps carefully and follow in the same way as mentioned.

  • First, you will have to download the SPD drivers on your system. Now, click on the downloaded file to start the installation process. Follow all on-screen instructions appearing on the screen to complete the installation process. If you already have the driver on the system, skip the step.
  • Next, you will have to download the stock firmware file for your device. Extract the firmware file contents for later use.
  • After this, you will have to download the SPD upgrade tool on the system. You will now have to extract the tool files also.
  • Once done, you need to open the extracted tool folder and then click on the upgrade download file to open the tool window for you.
  • In the tool window, you will have to click on the load packet option. Now, you will have to redirect the tool to the location where you have stored the firmware file.
  • Now, you have to turn off the device and then connect it to the system with the help of a USB cable.
  • Click on the start option to begin the flashing process.
  • Wait for the process to complete. When complete, you will see an upgrade successful message on the screen.
  • Detach the cable and terminate the tool window.

Download Micromax A62 Stock Firmware ROM (Flash File)

To use Micromax Bolt A62 Flashing Tool, You must download and install WinRAR or 7Zip.

This is it. Now your device is flashed. This was all you need to install the Micromax A62 Stock Firmware ROM. Hopefully, the article has helped you.

Leave a Comment