The flash files / Firmware Stock ROM or the firmware files are produced by the company only. You need to update the firmware of the system if you want to update the device or get rid of the issues that you are facing. In this article, we are going to talk about the Micromax Bolt Q331 flash file. We have mentioned how you can install the Micromax Q331 flash file. Stay tuned to the article to know more about it.
Below we have mentioned all the things that you will have to keep in mind while you are carrying out the process. It is a must to do all the things so that you can carry out the process easily.
- To begin with, you need to have some basic knowledge about the process. In case you do not know, you will have to seek help.
- Also, you will have to create a backup of all the data available on the device. It is a must that you do that because post flashing, you will lose all the data.
- You will also have to charge the device completely or at least up to 60 percent so that you can use it till the end of the process.
- Other than this, you must have to download the tool file and the firmware file according to the device you are using. You can look for compatible drivers on the internet.
- It is important that you scan all the files before using them on the system to be sure that they are safe to use.
Steps to Install Micromax Bolt Q331 Flash File
As we have mentioned you will have to use the SPD upgrade tool to install the Micromax Q331 flash file, here is how you can install it. Below we have mentioned all the steps that you will have to follow to install the flash file. Read the steps properly and follow in the same way as mentioned.
- First, you will have to download the SPD driver on the system. You will then have to open the installation window by clicking on the downloaded file and follow all the instructions appearing on the screen to complete the installation process. If you already have the driver on the system, skip the step.
- Next, you will have to download the stock firmware file for the device. It will download in the zip format. So, you will have to extract the contents for later use.
- Now, you will have to download the SPD upgrade tool on the system and then you will have to extract the contents of the tool files also.
- Once done, you will have to open the extracted tool folder, and then you will have to click on the upgrade download file. It will open the tool window for you.
- Next, you will have to look for the load packet option in the tool window and then you will have to redirect the tool to the location where you have stored the flash file.
- Now, you will have to turn off the device and connect the device to the system.
- After that, you will have to click on the download option to begin the flashing process. Now, you will have to wait for the process to complete.
- When the process will complete, you will get an upgrade successful message on the screen. You can now detach the cable and terminate the tool window.
Download Micromax Q331 Stock Firmware ROM – Flash File
So, this is it. These were all the steps that you will have to follow to install the Micromax Q331 flash file. We have mentioned all the things that you need to know. We hope that the article was helpful to you.