Micromax Canvas 2 Plus A110Q Firmware Stock ROM- Flash File

Micromax Canvas 2 Plus A110Q Flash FileYou can use a flash file for different reasons. You can use it to fix common issues like software issues, boot loop issues, IMEI issues, and dead issues. Also, they can be used to install the operating system of the device again. In this article, we are going to talk about the Micromax Canvas 2 Plus A110Q flash file / Firmware Stock ROM. We have mentioned the stepwise process that you need to follow to install the Micromax A110Q Stock Firmware ROM on the device. Read the article till the end to know more about it.

Preliminary Preparations

Below we have mentioned a list of certain things that you need to do so that you can carry out the process easily.

  • The very basic thing that you have to do is to have some basic knowledge about the process. In case you are not aware of the technicalities, you can seek help from an expert.
  • Also, you need to make sure that you use the tutorial for the specified device. If you use it on any other device, you can damage the device.
  • Other than this, you will have to download the tool file and the firmware file from an authenticated source only. It is a must to look for a compatible driver on the system.
  • It is a must to charge the device completely or at least up to 60 percent so that you can use the device till the end of the process.
  • You will also have to create a backup of all the data available on the device if you need to use the data later.
  • Lastly, you need to scan all the files to be sure that you are using all the safe files on the system.

Steps to Install Micromax Canvas 2 Plus A110Q Flash File

Now that you have fulfilled all the requirements that we have mentioned in the above section of the article, here is how you can proceed with the process. Below we have mentioned all the steps that you need to follow to install the Micromax Canvas 2 Plus A110Q flash file. Go through all the steps properly and follow in the same way as mentioned.

  • To begin with, you need to download the MediaTek driver on your system. You will then have to click on the downloaded file and open the tool window. Follow all the instructions appearing on the screen to complete the installation process. In case you already have the driver on the system, skip the step.
  • Next, you will have to download the stock firmware file on the system. You will have to extract the contents of the firmware file also.
  • Now, you need to download the SP flash tool on the system and extract the contents of the tool files.
  • Once done, you need to open the extracted tool folder and then click on the flash tool. The tool window will open on the screen.
  • After this, you need to click on the download agent option and scatter-loading option. You will then have to look for the scatter file in the stock ROM that you have extracted.
  • Next, you will have to click on the preloader.bin option. It is a must to do because if you won’t, you can brick the device.
  • Also, you need to click on the download option to begin the flashing process.
  • Now, you will have to connect the device to the system with the help of a USB cable. Also, you need to press the volume up button of the device so that the tool can detect the device.
  • When the tool will detect the device, the process will start.
  • Wait for the process to complete. On completion, a green ring will appear on the screen.
  • You will now have to detach the cable and terminate the tool window.

Download Micromax Canvas 2 Plus A110Q Stock Firmware ROM (Flash File)

To use Micromax A110Q Flashing Tool, You must download and install WinRAR or 7Zip.

So, this is it. This was how you can install the Micromax A110Q flash file on the system. We have provided you with all the information that you need to know about installing the Micromax A110Q Stock Firmware ROM.

Leave a Comment