Micromax Canvas 6 Pro E484 Firmware Stock ROM- Flash File

Micromax Canvas 6 Pro E484 Flash FileIn case you are looking for the Micromax Canvas 6 Pro E484 flash file, this article will be helpful for you. We have mentioned how you can install the Micromax E484 flash file / Firmware Stock ROM with the help of the SP flash tool. Stay tuned to the article to know more about it.

Preliminary Preparations

Before you can install the Micromax E484 flash file, there are certain things that you will have to do. These things will help you to install the flash file easily.

  • First, you need to have some basic knowledge about the process. in case you are not aware, you need to seek help from an expert.
  • You will also have to make sure that you use the tutorial for the specified device only. Using it for any other device can damage the device.
  • You must know that you will lose all the data after the completion of the process. So, it is advised to create a backup of all the data available on the device.
  • Also, you need to know that you need to use the device till the end of the process, so, you need to charge the device completely or at least up to 60 percent.
  • It is a must to scan all the files that you will download to be sure that all the files are safe to use on the system.
  • Lastly, you need to download the required files from an authenticated source and according to the device that you are using.

Steps to Install Micromax Canvas 6 Pro E484 Flash File

Now, in this section of the article, we have explained to you how you can proceed with the process. Below we have mentioned all the steps that you need to follow to install the Micromax Canvas 6 Pro E484 Stock Firmware. Read all the steps properly and follow them in the same way as mentioned.

  • First, you need to download the MediaTek driver on the system. You will then have to click on the downloaded file and open the installation window. Follow all the instructions appearing on the screen to complete the installation process. In case the driver is already available on the system, skip the step.
  • Now, you need to download the stock firmware file for the device. Click on the downloaded file and extract the contents of the firmware file.
  • Next, you need to download the SP flash tool on the system and then extract the contents of the tool files.
  • You will now have to open the extracted tool folder and then click on the flash tool file. The tool window will then open on the screen.
  • In the tool window, you will have to click on the scatter-loading option and download agent option. The scatter file will be available in the stock ROM that you have downloaded.
  • You will now have to click on the preloader.bin option. You must do this because if you won’t, you can brick the device.
  • Next, you need to click on the download option to begin the flashing process.
  • You will now have to turn off the device and then connect it to the system with the help of a USB cable. Also, you need to press the volume up button so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will begin.
  • Wait for the process to complete. When the process will complete, a green ring will appear on the screen.
  • Finally, detach the cable and terminate the tool window.

Download Micromax E484 Stock Firmware ROM (Flash File)

To use Micromax E484 Flashing Tool, You must download and install WinRAR or 7Zip.

This is it. This was how you can install the Micromax Canvas 6 Pro E484 flash file on the device. Following all the steps in the same way as mentioned will help you to install the Micromax Canvas 6 Pro E484 Stock Firmware ROM easily. We hope that the article was helpful.

Leave a Reply