Off the chance you are looking for the Micromax Canvas A1 AQ4501 Flash file, this is the right article for you. We have mentioned how you can install the Micromax AQ4501 Flash file / Firmware Stock ROM using the SP flash tool. Stay tuned to the article to know about it in detail.
Before you can start the flashing process, here is a list of all the things that you will have to keep in mind. These things will help you to carry out the process easily.
- First, you will have to make sure that you are aware of the technicalities. In case you are not aware, you will have to seek help.
- Also, you would know that you will lose all the data post flashing, so you need to create a backup so that you can use the data later.
- It is a must that you charge the device completely or at least up to 70 percent so that you can use the device till the end of the process.
- Other than this, you will have to download the tool file and the driver file compatible with the device. It is a must to look for a compatible firmware file.
- You will also have to scan all the files that you will download to be sure that they are safe to use on the system.
Steps to Install Micromax Canvas A1 AQ 4501 Flash File
Now that you have fulfilled all the requirements that we have mentioned in the above section, you can proceed with the process. Below we have mentioned all the steps that you will have to follow to install the Micromax AQ 4501 flash file. Read all the steps carefully and follow in the same way as mentioned.
- To begin with, you will have to download the MediaTek driver on the system. You will have to then click on the downloaded file and follow all the on-screen instructions to complete the installation process. In case you have the driver on the system, skip the step.
- Also, you will have to download the stock ROM for the device. It will download in the zip format so, you need to extract the contents of the firmware file.
- After this, you will have to download the SP flash tool on the system. You will have to extract the tool files also.
- Once done, you will have to open the extracted tool folder, and then you will have to click on the flash tool file. It will open the tool window for you.
- Now, you will have to click on the scatter-loading option and download agent option. The scatter file will be available in the stock ROM that you have downloaded.
- After this, you will have to click on the preloader.bin option. It is a must to do that because if you won’t, there are chances that you will brick the device.
- Next, you will have to click on the download option to begin the flashing process.
- Simultaneously, you need to switch off the device and then connect it to the system with the help of a USB cable. You will also have to press the volume up button of the device so that the tool can recognize the device.
- When it is done, the process of flashing will start.
- Now, you will have to wait for the process to complete. When the process will complete, you will get a green ring on the screen.
- Finally, terminate the tool window and detach the cable.
Download Micromax AQ4501 Stock Firmware ROM: (Flash File)
So, now your device is flashed. This was all you need to know about installing the Micromax AQ 4501 flash file on the device. We hope that the article was helpful to you.