Micromax Canvas Fire 3 A096 Firmware Stock ROM- Flash File

Micromax Canvas Fire 3 A096 Flash FileOff the chance you are looking for a Micromax Canvas Fire 3 A096 flash file, this article can be helpful for you. In this article, we have provided you with a Micromax A096 flash file / Firmware Stock ROM and how you can install the file. Stay tuned to the article to know more about it.

Requirements

In this section of the article, we have mentioned a list of all the things that you will have to keep in mind or do so that you can carry out the process easily.

  • First, you will have to make sure that you are using the tutorial for a particular device only. You should also have some basic knowledge about the process. Off the chance you do not know, you will have to seek help.
  • You would know that you will lose all the data available on the device. So, you need to create a backup of all the data available on the device to save it for later use.
  • Also, remember to charge the device completely or at least up to 70 percent so that you can use it till the end of the process.
  • You must also download the tool file and the firmware file from an authenticated source. Look for a compatible driver on the internet.
  • It is a must to scan all the files that you will download to be sure that they are safe to use on the system.

Steps to Install Micromax Canvas Fire 3 A096 Flash File

After fulfilling all the requirements that we have mentioned in the above section of the article, here is how you can proceed with the process. Below we have mentioned all the steps that you will have to follow to install the Micromax Canvas Fire 3 A096 flash file. Read all the steps carefully and follow in the same way as mentioned.

  • The very first thing that you have to do is to download the MediaTek driver on your system. You will then have to open the installation window by clicking on the downloaded file. Follow all the instructions appearing on the screen to complete the installation process.
  • Now, you will have to download the firmware file for your device. You will then have to extract the contents of the firmware file.
  • After this, you will have to download the SP flash tool on the system. Extract the contents of the tool file.
  • Now, you will have to open the extracted tool folder and then click on the flash tool file. The tool window will open on the system.
  • Once done, you will have to look for the scatter-loading option and download agent option in the tool window. You will then have to look for the scatter file in the Stock Rom that you have downloaded.
  • Next, you will have to untick the option for preloader.bin. You must do that because if you won’t, you will brick the device.
  • After this, you will have to click on the download option to start the flashing process.
  • Now, you will have to turn off the device and then connect it to the system with a help of a USB cable. You also need to press the volume up button of the device so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will begin.
  • Wait for the process to complete. On completion, you will see a green ring on the screen.
  • Finally, detach the cable and terminate the tool window.

Download Micromax A096 Stock Firmware ROM (Flash File)

To use Micromax Fire 3 A096 Flashing Tool, You must download and install WinRAR or 7Zip.

Now that your device is flashed, you can start the device. This was all you need to know about installing the Micromax Canvas Fire 3 A096 flash file. We hope that the article was helpful to you.

Leave a Reply