Flash files are used to install the firmware of the device again on the system. Firmware is updated by the company only and is released by the company only. A flash file can help you to upgrade the device to the latest version or downgrade it to the factory version. You can also get rid of a lot of issues like IMEI issues, software issues, dead issues, and boot loop issues. In this article, we have talked about the Micromax Canvas Mad A94 flash file. We have mentioned how you can install the Micromax A94 flash file (Firmware Stock ROM) on the device. Read the article till the end to know more about it.
Points to Keep in Mind
To carry out the process easier, here is a list of certain things that you will have to do or keep in mind before starting the process.
- You will need to have some knowledge about the process. Off the chance you do not know, you will have to seek help. Also, you must use this tutorial on a particular process.
- You would know that you will lose all the data present on the device. So, it is a must that you create a backup of all the data for future use.
- Also, you will have to download the tool file and the driver from an authenticated source. Make sure that you use the flash file according to the device that you are using.
- Remember to keep your device charged completely or at least up to 70 percent so that you can use the device till the end of the process.
Steps to Install Micromax Canvas MAd A94 flash file
In this section of the article, we have mentioned all the steps that you will have to follow to install the Micromax A94 flash file on the device. Read all the steps carefully and follow in the same way as mentioned.
- To start with, you will have to download the Broadcom Multi downloader file on the system. You will then have to extract the files of the tool on your system.
- After this, you will have to also download all the drivers. You will then have to extract the driver’s files and then install the driver on the system. Follow all the instructions appearing on the screen to complete the installation process.
- When done, you will have to turn off the device and then you will have to download the firmware file on the system.
- You will then have to extract the firmware files on the system.
- After this, you will have to open the extracted tool folder and then you will have to click on the multi downloader file.
- After this, you will have to click on the Settings option and then choose the option for configuration.
- You will now have to click on the locate firmware option and redirect the tool to the location where you have stored the firmware file.
- After this, you will have to click on the apply option to begin the process.
- You will now have to connect the device and the system. Simultaneously, you will have to press the volume up and down button on the device.
- Also, you will have to wait for the process to complete. When the process will complete, you will see the success message on the screen.
- You will now have to terminate the tool window and also, detach the cable.
Download Micromax A94 Stock Firmware ROM (Flash File)
So, this is it. Now, your device is flashed. This was all you need to know about installing the Micromax A94 flash file on the device. Following all the steps, in the same way, will help you to complete the process easily. We hope that the article was helpful to you.