Micromax Canvas Tab P480 Firmware Stock ROM- Flash File

Micromax Canvas Tab P480 Flash FileIn case you are looking for the Micromax Canvas Tab P480 flash file, this article can surely help you. Here, the full process to install the Micromax P480 Firmware Stock ROM is mentioned, and also the original flash file is provided. Read the article till the end to know more about it.

Preliminary Preparations

In this section of the article, we have mentioned a list of certain things that you need to so that you can complete the installation process easily.

  • To begin with, you need to be aware of the technicalities of the process. Off the chance you are not aware of the technicalities, you need to seek help from an expert.
  • Also, you need to use the tutorial for the specified device only. If you use it for any other device, you can damage the device.
  • You would know that you can lose all the data after the completion of the process, so, you need to create a backup of all the data available.
  • Other than this, you need to use the device till the end of the process, so, you need to charge the device completely or at least up to 60 percent.
  • Next, you need to download the tool file and firmware file from an authenticated source and according to the device that you are using.

Steps to Install Micromax P480 Flash File

Now that you have fulfilled all the requirements that we have mentioned in the above section of the article, you can proceed with the process. Below we have mentioned all the steps that you need to follow to install the Micromax P480 flash file. Follow all the instructions properly and follow in the same way as mentioned.

  • First, you need to download the MediaTek driver on the system. You will then have to click on the downloaded file and open the installation window. Follow all the instructions appearing on the screen to complete the installation process. In case the driver is available on the system, skip the step.
  • Next, you need to download the firmware file for your device. You will then have to extract the contents of the firmware file.
  • After this, you need to download the SP flash tool on the system and then extract the contents of the tool folder also.
  • Once done, you need to open the extracted tool folder and then click on the flash tool file. It will open the tool window on the screen.
  • Now, you need to click on the download agent option and scatter-loading option. The scatter file will be available in the stock ROM that you have downloaded.
  • Next, you need to untick the checkbox for the preloader.bin option. You need to do this because if you won’t, you can brick the device.
  • You will then have to click on the download option to begin the process.
  • Now, you need to turn off the device and then connect it to the system with the help of a USB cable. Also, you need to press the volume up button of the device so that the tool can detect the device.
  • When the tool will detect the device, the process of flashing will begin.
  • Wait for the process to complete. When the process will complete, a green ring will appear on the screen.
  • Finally, detach the cable and terminate the tool window.

Download Micromax P480 Stock Firmware ROM (Flash File)

To use Micromax Canvas Tab P480 Flashing Tool, You must download and install WinRAR or 7Zip.

This is it. These were all the steps that you need to do so that you can install the Micromax P480 Stock ROM on the device. All the required information that you need to know about installing the Micromax Canvas Tab P480 Stock Firmware ROM is mentioned in the article. Hope so the article has helped you.

Leave a Reply