Micromax Q385 Flash File- Stock ROM Firmware

In case you are looking for the Micromax Q385 flash file, stay tuned to this article. In this article, we have mentioned how you can use the SP flash tool to install the Micromax Q385 flash file firmware. We have mentioned a full stepwise process that you will have to follow. Read the article till the end.

Micromax Q385  flash file

Requirements

Below we have mentioned all the things that you need on your system before you start the flashing process. Read the list of all the things below and make sure that you have all of it on your system.

  1. You need to have basic knowledge about the process. In case you don’t know, you may have to consult an expert.
  2. Also, you will have to charge your device completely. It is important because your device needs to work till the completion of the process. Therefore, you need to charge it at least up to 70 percent.
  3. You will also have to create a backup of all your data. It is a must because, after the completion of the flashing process, you may lose all your data.
  4. Other than this, you will have to download the authenticated version of the tool and the driver that you will have to use during the process.
  5. Lastly, you will have to scan all the files that you have downloaded. It is important to be sure that all the files are secure to use on the system.

Download Micromax Q385 Stock ROM Firmware (Flash File)

For Windows

For Linux

Steps to install the Micromax Q385 Flash File

We hope that you have fulfilled all the requirements that we have mentioned above. Now, you will have to follow all the steps that we have mentioned below to install the Micromax Q385 flash file (Stock ROM). Read the steps properly and follow them in the same order as we have mentioned.

  1. First, you need to have a MediaTek driver on your system. You will then have to click on the downloaded file to open the installation window. Now, you will have to follow the instructions appearing on the screen to complete the process.
  2. After this, you will have to download the stock firmware of your device. the firmware will download in the zip format, you will have to extract the files to a new folder.
  3. Once done, you will have to download the SP flash file. It will also download in the zip format. You will have to extract the files to a new folder.
  4. Now, in the tool folder, you will have to look for the flash tool file. Micromax Q385 flash file
  5. The tool window will now open up. You will have to look for the scatter-loading option. You will also have to look for the download agent. It will be available in the stock ROM of your device. Micromax Q385 stock firmware download
  6. After this, you will have to click on the download option. You will then have to connect your device to the system using the USB cable.
  7. You also have to keep in mind that you have turned off your device. After connecting, you will have to press the volume up button of your device so that the tool can detect your device.
  8. Now, you will have to wait for the tool to detect the device. Once detected, the process will then start on its own.
  9. Next, you will have to wait for the process to complete.
  10. On completion, you will see a green ring on the screen. Micromax Q385 stock firmware
  11. Finally, you will have to detach your device and the system and also, close the tool window.

Now the process is complete. We hope that this article has helped you in installing the Micromax Q385 flash file. Hopefully, this article was informative for you.

Leave a Comment