Micromax Q412 Firmware Stock ROM- Flash File

Micromax Canvas Fire 4G Plus Q412 flash fileIn case you are looking for the Micromax Canvas Fire 4G Plus Q412 flash file, this article can be helpful to you. In this article, we have mentioned how you can install the Micromax Q412 Firmware Stock ROM. Stay tuned to the article to know more.

Points to Remember

Below we have mentioned all the things that you will have to do so that you can carry out the process easily. These things are mandatory and only then you will have to proceed with the process.

  • First, you will need to have some basic knowledge about the process. In case you do not know, you will have to seek help from an expert. You must keep in mind that this tutorial is valid for a particular device.
  • Also, you must know that you will lose all the data post the flashing process. To use the data later, you will have to create a backup of all the data.
  • It is a must that you charge the device completely or at least up to 60 percent so that you can use the device till the end of the process.
  • You will also have to download the tool file and firmware file from an authenticated source. The driver file will be available on the internet.
  • You need to be sure that you are using a safe file on the system. So, it is a must to scan all the files before using them on the system.

Steps to Install Micromax Canvas Fire 4G Plus Q412 Flash File

You will have to use the SP flash tool to install the Micromax Canvas Fire Q412 flash file. Below we have mentioned all the steps that you will have to follow to install the flash file on your device. Read all the steps carefully and follow in the same way as mentioned.

  • To begin with, you will have to download the MediaTek driver on your system. You will then have to open the installation window by clicking on the downloaded file. Follow all the instructions appearing on the screen to complete the installation process. In case you already have the driver on the system, skip the step.
  • Also, you will have to download the stock firmware file on the system. You will have to then extract all the files on your system.
  • After this, you will have to download the SP flash tool on the system. Extract the contents of the tool files on the device.
  • Now, you will have to open the extracted tool folder and then you will have to click on the flash tool file. It will open the tool window for you.
  • In the tool window, you will have to click on the scatter-loading option and download agent option. The scatter file will be available in the stock ROM of the device.
  • After this, you will have to click on the preloader.bin. It is important to do because if you won’t, you will brick the device.
  • Next, you will have to click on the download option so that you can begin the flashing process.
  • Now, you will have to turn off the device, and then you will have to connect the device to the system. You will have to also press the volume up button of the device so that the tool can detect it.
  • Once the tool will detect the device, the flashing process will begin.
  • Wait for the process to complete. When it will complete, you will see a green ring on the screen.
  • Finally, detach the cable and terminate the tool window.

Download Micromax Q412 Stock Firmware ROM (Flash File)

To use Micromax Q412 Flashing Tool, You must download and install WinRAR or 7Zip.

So, this is it. This was how you can install the Micromax Q412 flash file on your device. We hope that the article was helpful to you.

Leave a Reply