Micromax Q461 Firmware Stock ROM: Flash File

Micromax Q461 Flash FileFlash files AKA Stock Firmware ROM can be helpful when you want to upgrade the device or downgrade it to the factory version. In case you have rooted the device, you need to flash it to get it back in the original form. In this article, we are going to talk about the Micromax Canvas Juice Q461 flash file. Here is how you can install the Micromax Q461 Firmware Stock ROM flash file on the system. Stay tuned to the article to know more.

Requirements

Before you can proceed with the flashing process, here are all the things that you need to do before you can proceed with installing the Micromax Q461 flash file. Read the list of all the things below.

  • First, you need to be aware of some basic knowledge of the process. In case you are not aware, you will have to seek help.
  • Also, you need to download the Sp flash tool on your system from the official website. Check for compatible drivers on the internet.
  • You would know that you will lose all the data post flashing, so, you need to create a backup if you do not want to lose the data.
  • Other than this, you will have to charge the device at least up to 60 percent so that you can use it till the end of the process.
  • You need to scan all the files before installing them on the system to be sure that they are safe to use.

Steps to Install Micromax Canvas Juice Q461 Flash File

Now that you have fulfilled all the requirements that we have mentioned above, here are all the steps that you will have to follow to install the Micromax Q461 flash file. Read the steps carefully and follow in the same way as mentioned.

  • First, you need to download the MediaTek driver on your system, and then you will have to follow the on-screen instructions to install the driver on the device. In case you already have it on the system, you will have to skip this step.
  • Next, you will have to download the firmware file for the device and then extract the contents of the firmware file to another location.
  • Once done, you will have to download the SP flash tool on your system, and then you will have to extract the contents of the tool file also.
  • Now, in the extracted tool folder, you will have to look for the flash tool file and then click on it. It will open the tool window for you.
  • You will now have to click on the scatter-loading option and the download agent option. The scatter file is available in the stock ROM of the device.
  • Next, you will have to look for the preloader.bin option and untick the checkbox for it. You must do it because if you won’t, there are chances that you will brick the device.
  • Once done, you will have to click on the download option to begin the flashing process.
  • Now, you will have to turn off the device and also, connect the device and the system with the help of a USB cable.
  • Also, you will have to press the volume up button so that the tool can detect the tool. When the tool will detect it, the process of flashing will start.
  • Wait for the process to complete. When the process will complete, you will see a green ring on the screen.
  • Now, you will have to terminate the tool window, and also, you will have to detach the cable.

Download Micromax Canvas Juice Q461 Stock Firmware ROM (Flash File)

So, this is it. This was how you can install the Micromax Q461flash file on the system. We hope that you have found the article helpful.

Leave a Comment