If you do not know how to use the Micromax A463 flash file, this article can help you. In this article, we have mentioned the process that you will have to follow to install the Micromax Q463 flash file on your system. We have mentioned how you can use the SP flash tool to complete the process. Read the article till the end to know more about the Micromax Q463 flash file tool.
You will have to do certain things before you can start the flashing process. Below we have mentioned all the things. Make sure you have them and then only proceed with the process. Read the list below.
- You will first need to have basic knowledge about the process. Otherwise, you can consult an expert.
- Also, you will have to charge your device at least up to 70 percent so that it can operate till the end of the process.
- You will also have to create the backup of your data present in the device so that you do not lose your data after the completion of the process.
- Other than this, you will have to download the tool and the driver from the official website only and be sure that the files are safe to use on your system.
Steps to install Micromax Q463 Flash File
In this section of the article, we have mentioned all the steps that you will have to follow to install the Micromax Q463 flash file on your system. Follow the steps in the same way as they are listed below.
- The very first thing that you will have to do is to download the MediaTek driver auto-installer on your system. You will then have to install the file on your system by following all the on-screen instructions appearing on the system.
- After this, you will have to download the stock firmware file on your system. You can find the stock firmware file according to the device you are using on the internet. The file will download in the zip format and you will have to extract the contents.
- Now, you will have to download the SP flash tool on your system and then you will have to extract the contents of the tool file also.
- Once done, you will have to open the tool folder, and then you will have to click on the flash tool file to open the tool window.
- On the tool window, you will have to click on the scatter-loading option and then you will have to look for the scatter file in the stock ROM of your system.
- Also, you will have to look for the download agent and look for the file. After this, you will have to untick the option for preloader.bin.
- You will then have to click on the download option and then you will have to turn off your device and then you will have to connect your device and the system using the USB cable.
- Once done, you will have to press the volume up button of your device so that the tool can detect the device.
- When the tool will detect the file, the process will start on its own. You will then have to wait for the process to complete. Once the process will complete, you will see a green ring on the screen.
- You will have to then remove the cable and you will have to terminate the tool window.
Download Micromax Q463 Stock Firmware (Flash File)
So, this was all about installing the Micromax Q463 flash tool. Following the steps, in the same way, will help you to go through the process easily. Hopefully, the article helps.