Xiaomi Redmi 1S Flash File: Stock ROM Firmware

Redmi 1S Flash FileIn case you are looking for the Mi 1s flash file, you will have to use the Xiaomi tool. In this article, we are going to talk about what Xiaomi Redmi 1s flash file is and how you can use one.

Stock firmware files are used to install the operating system of your device again on your system. You can use the Mi 1s flash file if you are facing any issues with your mi device. Other than this, you can use the flash file to resolve software issues, IMEI issues, boot loop issues, and dead issues with your device. Other than this, you can use the flash file to unbrick your device if you have bricked it. Moreover, you can also use the flash file if you are facing the application has stopped working more frequently. Read this article to know how to use the Mi 1s flash file. We have mentioned all the steps that you will have to follow. Stay tuned to the article till the end.

Preliminary preparations

Below we have mentioned certain things that you will need on your system before you start the process. It is important to have all those things so that you can carry out the process smoothly.

  • First, you need to be aware of all the technicalities. It is important to be aware and if you are not aware, you may have to consult an expert.
  • Other than this, you will have to charge your device completely. In case you are not able to charge it completely, you are required to charge it at least up to 70 percent.
  • Moreover, you will have to create a backup of your data because there are high chances that you will lose all your data after the completion of the process. Make sure to create a backup.
  • Other than this, you will have to download the latest and compatible version of the tool that you will have to use during the process. Also, look for compatible drivers on the internet.

Always remember to scan all the files that you have downloaded. It is important to be sure that the file is safe to use on the system.

Xiaomi Redmi 1S Flash File Download

Steps to install the Mi 1s Flash File

Below we have mentioned all the steps that you will have to follow to install the Mi 1s flash file. We have mentioned the full process that you will have to follow. Make sure that you follow all the steps in the same way as we have mentioned.

You will first have to download the Xiaomi Flash tool on your system. After this, you will have to click on the downloaded file to start the installation process. Complete the process according to the instructions appearing on the screen.

Once done, you will have to download the stock firmware on your system. You can look for it on the internet. After that, you will have to extract the files of the firmware to a new folder.

Now, you will have to download the Xiaomi USB driver on your system and then install the driver on your system.

After this, you will have to switch off your device and then boot it into download mode. To do this, you will have to press the Power button and Volume down button and then keep holding it.

Now, you will have to connect the system and the device using the USB cable.

Once done, you will have to look for the Xiaomi tool in the start menu of your device.

In the tool window, you will have to look for the select button and then click on it. You will then have to redirect the tool window to the folder where you have stored the firmware.

Now, you will have to select the firmware that you wish to install.

Once done, click on the flash option to start the process.

You will then have to wait for the process to complete. Once it will complete, you will get the success message on the screen.

Finally, terminate the tool window and also, detach the system and the device.

This was all you need to know about the Mi 1s flash file. We hope that this article was helpful to you and was informative for you.

Leave a Reply