Samsung G355H Flash File: Firmware ROM Stock

samsung-g355h flash fileLooking for the Samsung G355H flash file? You have come to the right article. In this article, we are going to discuss how you can use the Samsung G355H flash file to fix software issues, IMEI issues, lag issues, or boot loop issues in your device. Also, you will have to follow the process mentioned in the article to restore your device to the factory setting. Stay tuned to the article to know more on how to use the Samsung G355H flash file.

Note: You need to make sure that you have created a backup of the data on your device because all your data will be deleted after the flashing process. Also, charge your phone completely or at least 70 percent to keep it working till the end of the process.

Steps to use the Samsung G355H flash file

Odin tool is an open-source tool that has to be downloaded on the system to flash your Samsung device. You will have to download the tool from the internet. Follow the steps mentioned below to use the Samsung G355H flash file. Read the steps carefully.

Initially, you will have to download the Samsung USB driver on your system and then install it on your system. If you have it installed previously, skip the step.

After this, you will have to find the firmware file for your Samsung G355H device. Make sure it is compatible with your device. After downloading the tool, you will have to extract the files from the downloaded folder.

Once done, you will have to switch off your device and then boot it into download mode.

To do this, you will have to press the Home button, Power button, and the Volume down button and keep holding it until your phone starts vibrating. Once you notice its vibration, you will have to remove your hand from the power button only and keep holding the other two.

When your phone will be in download mode, you will get a warning sign on your screen. You will then have to slightly press the Volume Up key.

Once done, you will have to download the Odin tool on your system to extract its file also. In the new folder, look for the Odin3 file and click on it to start the tool.

Connect your device and the system. Wait for your device to be recognized. When recognized, you will see an Added message on the screen.

In the tool window, you will have to click on the button indicating PDA and you will then have to choose the tar file.

You will then have to click on the option to start the process. Wait for the process to complete and after the completion, you will see a green message on the screen. You will then have to disconnect your device and wait for the device to restart.

Now, you will find your device in the boot loop. You need to boot it into recovery mode. To do that, you will have to press the power button, home button, and the Volume UP button until your phone vibrates. When you notice that it is vibrating, you will have to remove your hand from the Power button and keep holding the other two.

Once done, from the options on your screen, you will have to click on the wipe data option.

It will then clear all the cache from your device. Finally, you will have to restart your device.

Now, the process of flashing is complete. We hope that now you know how to use the Samsung G355H flash file. We hope that the article has helped you.

Leave a Reply