In case you are facing issues with your Samsung Guru 1200Y device, you can use the flash file to fix all the issues. You can also unbrick the device in case you have bricked it. In this article, we have mentioned how you can install the Samsung E1200Y flash file. We have mentioned the full stepwise process that you will have to follow and how you have to follow. Stay tuned to the article till the end to know more.
It is better to do some things before starting the process so that you can carry out the process easily. We have mentioned the list of all the things below. Have a look at the list and make sure that you do all the things.
- It is important that you have basic knowledge about the process. In case you do not have all the required knowledge, you will have to help from an expert.
- You will have to charge the device completely or at least up to 70 percent so that you can use the device till the end of the process.
- We will suggest you scan all the files before using them on the system so that you can be sure that you are using a safe file on the system.
- Other than this, you will have to create a backup of the data available on the device. It is a must that you create a backup because post flashing, you will lose all the data from the device.
- Moreover, you will have to download the Xiaomi tool from an authenticated source only. You will also have to check the compatibility of the driver that you will download.
Steps to Install Samsung Guru GT-E1200Y Flash File
You will have to use the SPD flash tool to install the Samsung 1200Y flash file. In this section of the article, we have mentioned all the steps that you will have to follow to install the Samsung 1200Y flash file. Read the steps carefully and follow them in the same way as mentioned.
- First, you will have to download the SPD driver on the system. You will then have to follow the on-screen instructions to complete the installation process. In case you already have it on the system, you can skip this step.
- When done, you will have to download the stock firmware file for the system. You will have to extract the contents of the file to the desired location.
- Now, you will have to download the SPD upgrade tool on the system and then you will have to extract the contents of the tool file to the desired location.
- After this, you will have to open the tool folder and then look for the upgrade download file. It will then open the tool window for you.
- Now, you will have to click on the load packet option and then you will have to redirect the tool to the location where you have stored the flash file.
- When done, you will have to connect the device with the system. It is important that you turn off the device first.
- Now, you will have to click on the start option and the process of flashing will start.
- Wait for the process to complete. When it will complete, you will see an upgrade complete message on the screen.
- You will now have to terminate the tool window and then you will have to detach the system and the device.
Download Samsung Guru GT-E1200Y Firmware Stock ROM (Flash File)
This is it. This was all you need to know about installing the Samsung GT-E1200Y flash file. We have tried to provide you with all the important things that you need to know. We hope that the article helps.