Samsung J200F Firmware Stock ROM: Flash File

Samsung J200F Flash FileStock firmware files can help you to get rid of common issues that you can face with your device. Also, if you have bricked your device, you can get it back in the original form with the help of a flash file. In this article, we are going to talk about the Samsung SM-J200F Firmware Stock ROM Flash File. We have mentioned all the steps that you will have to follow to install the Samsung J200F flash file on the device. Stay tuned to the article to know more about it.

Note: you must know that this tutorial applies only to a particular device. We will suggest you not try it on any other device. Other than this, post flashing, all the data will vanish from the device, so, you need to create a backup for future use.

Steps to Install Samsung SM-J200F Flash File

We hope that you know that this tutorial is valid for a particular device only. Using it on any other device can damage it. Now, here are all the steps that you will have to follow to install the Samsung J200F flash file on the device. Read the steps carefully and follow in the same way.

  • First, you will have to download the Samsung USB driver on the system and then you will have to install the driver by following all the instructions appearing on the screen. In case you have the driver, you can skip the step.
  • Next, you will have to download the firmware file for the device and then you will have to extract the contents of the firmware file.
  • When done, you will have to turn off the device and then connect it to the system with the help of a USB cable.
  • Now, you will have to boot the device in download mode. For that, you will have to press the volume down button, power button, and the home button together until the device vibrates. When the device will vibrate, you will have to leave the power button only.
  • Next, when the warning sign will appear on the screen, you will have to press the volume up button only.
  • Once done, you will have to download the Odin tool on the system, and then you will have to extract the contents of the file. Now, you will have to look for the Odin 3 file and then click on it to open the tool window.
  • In the tool window, you will have to add all the files that are required. You will then have to select all the files from the firmware folder that you have extracted and add them.
  • Click on the download button to begin the flashing process. Wait for it to complete.
  • On completion, you will get a success message on the screen and the device will be stuck in the boot loop.
  • To fix it, you need to boot the device in recovery mode. For that, you will have to press the volume down button, power button, and the home button together until the device vibrates. When the device will vibrate, you will have to leave the power button only.
  • From the menu appearing on the screen, you will have to click on the wipe data option. Wait for it to complete.
  • When it will complete, the device will start on its own. Now, you will have to detach the cable and terminate the tool window.

Download Samsung SM-J200F Stock Firmware ROM (Flash File)

Now, your device is flashed. Following all the steps, in the same way, will make it easy for you to install the Samsung J200F flash file on the system. We hope that the article was helpful.

Leave a Reply