Samsung SM-G350E Stock Firmware ROM: Flash File

samsung-sm-g350e Flash FileOff the chance you are looking for the Samsung G350e flash file, this is the right article for you. In this article, we have explained how you can install the Samsung SM-G350e flash file (Stock Firmware ROM) on your system. You must know that you will have to use the Odin tool to install the Samsung flash file and we have mentioned the full process for the same. Read the article till the end to know more.

 

Note: Now, before you can start the process, it is important that you know that post flashing you will lose all your data. So, it is a must that you create a backup of your data. Other than this, you will have to charge your device completely or at least up to 70 percent.

Steps to Install Samsung G350E Flash File

As we have mentioned, you will have to use the Odin tool to install the Samsung G350e flash file. In this section of the article, we are going to explain to you the process that you will have to follow to install the flash file. Read the steps carefully and follow them in the same way as we have mentioned.

  1. First, you will have to download the Samsung USB driver on your system and then you will have to follow the on-screen instructions to complete the installation of the drivers.
  2. Once done, you will have to download an appropriate stock firmware file for your device. Make sure that you download the compatible file. You will then have to extract the contents of the firmware folder.
  3. After this, you will have to switch off your device and then boot it into download mode.
  4. For that, you will have to press the volume down button, power button, and home button together and you will have to keep holding it until the device vibrates. Once the device starts vibrating, you will have to leave the power button only.
  5. Next, you will see a warning sign on the screen, and then you will have to press the volume up key of your device to continue the process.
  6. After this, you will have to download the Odin tool on your system and then you will have to extract the files of the tool folder also.
  7. Now, you will have to open the tool folder and then click on the odin3 file.
  8. Once done, you will have to add all the files asked. You will get all the files in the firmware folder that you have extracted. You will have to pick up the firmware file with the .tar,.md extension.
  9. After this, you will have to click on the start option to begin the process.
  10. Wait for the process to complete and when it will complete, you will see an updated successful message on the screen.
  11. Now, you will find your device stuck in the boot loop. To fix it, you will have to boot it into recovery mode.
  12. For that, you will have to press the volume down button, power button, and home button together and you will have to keep holding it until the device vibrates. Once the device starts vibrating, you will have to leave the power button only.
  13. You will now get a menu on the screen and you will have to select the option for wipe data option. Wait for it to complete.
  14. When it will complete, your device will restart on its own.

Download Samsung SM-G350E Stock Firmware ROM (Flash File)

So, these were all the steps that you will have to follow to install the Samsung SM-G350E flash file on the system. We hope that you have found this article helpful and you will now be able to install the flash file on your system.

Leave a Reply