Samsung Galaxy J7 SM-J700H Firmware Stock ROM- Flash File

Samsung Galaxy J7 Flash FileIn case you are looking for the Samsung Galaxy J7 SM-J700H flash file, this is the right article for you. We have mentioned all the steps that you will have to follow to install the Samsung J700H flash file / Firmware Stock ROM with the help of the Odin tool. Stay tuned to the article to know more about it.

Things to Remember

Before installing the Samsung J700H flash file, you will have to do certain things. Below we have mentioned a list of all the things that you will have to do.

  • First, you will need to have some basic knowledge about the process.
  • Also, you need to charge the device completely or at least up to 70 percent.
  • It is a must to create a backup of all the data available on the device.
  • You will also have to download the tool file and the firmware file from an authenticated source only.
  • Scan all the files before using them on the system.

Steps to Install Samsung Galaxy J7 SM-J700H Flash File

Now that you have fulfilled all the requirements that we have mentioned in the above section of the article, you can proceed with the process. Below we have mentioned all the steps that you will have to follow to install the Samsung SM-J700H flash file. Read all the steps carefully and follow in the same way as mentioned.

  • To begin with, you will have to download the Samsung USB driver on your system. You will then have to click on the downloaded file and open the installation window. Now, follow all the instructions appearing on the screen to complete the installation process. In case you already have the driver on the system, skip the step.
  • Next, you will have to download the Samsung J700H flash file on the system. You will then have to extract the contents of the firmware file on the system.
  • After this, you will have to turn off the device and then connect it to the system with the help of a USB cable.
  • Also, you will have to boot the device in download mode. To do that, you will have to press the volume down button, power button, and home button together until the device vibrates. When the device will vibrate, you will have to leave the power button only.
  • Now, you will get a warning sign on the screen and then you will have to press the volume up button of the device to continue the process.
  • After this, you will have to download the ODIN tool file on your system. You will then have to extract all the tool files on the system.
  • You will now have to open the tool folder and then you will have to click on the Odin3 file to open the installation window for you.
  • In the tool window, you will need to add all the required files. All the files will be present in the stock ROM that you have downloaded.
  • Now, you will have to click on the start option to begin the flashing process.
  • Wait for the process to complete. When the process will complete, you will see a successful message on the screen.
  • You will see that your device is stuck at the boot loop. To fix it, you will have to boot the device in recovery mode only.
  • To do that, you will have to press the volume down button, power button, and home button together until the device vibrates. When the device will vibrate, you will have to leave the power button only.
  • Also, you will have to click on the factory reset option and wait for it to complete.
  • When the process will complete, the device will restart on its own.

Download Samsung SM-J700H Stock Firmware ROM (Flash File)

To use Samsung SM-J700H Flashing Tool, You must download and install WinRAR or 7Zip.

So, now your device is flashed. This was all you need to know about downloading the Samsung J700H flash file. We have tried to mention all the things that you need to know. We hope that the article was helpful to you.

Leave a Comment