Samsung SM-J710F Firmware Stock ROM: Flash File

Samsung J710F flash fileIn case you are looking for the Samsung SM-J710F Flash file, this is the right article for you. In this article, we have mentioned different steps that you will have to follow to install the Samsung Galaxy J7 SM-J710F firmware Stock ROM flash file on the system using the SP flash tool. Stay tuned to the article till the end to know more about it.

Things to Remember

Before you can start the process, there are certain things that you need on your system. Read the list below.

  1. Make sure that you have basic knowledge about the process.
  2. You will have to make sure that charge your device at least up to 70 percent.
  3. Create a backup of all the data present on the device because post flashing, all the data will vanish.
  4. Also, you will have to download the appropriate version of the tool and the firmware file.
  5. Scan all the files to be sure that you are using a safe file in the system.

Steps to Install Samsung SM-J710F (Samsung Galaxy J7) Flash File

Below we have mentioned all the steps that you will have to follow to install the Samsung SM-J710F Flash file on your system. Read the steps carefully and follow them in the same way as mentioned.

  1. First, you will have to download the USB driver to your system. You will have to follow the on-screen instructions to complete the process. In case you have the driver on the system, you may skip this step.
  2. After that, you will have to download the stock firmware for your device. You can find the stock firmware on the internet. You will then have to extract the contents of the firmware file.
  3. Once done, you will have to turn off your device and boot it into download mode. To do that, you will have to press the power button, home button, and volume down button and keep holding it till your phone starts vibrating. You will then have to leave the power button only.
  4. Now, you will get a warning sign on the screen and then you will have to press the volume up button on the screen to continue with the process.
  5. Once done, you will have to download the Odin tool on your system, and then you will have to extract the contents of the tool also. From the tool folder, you will have to click on the odin3 file to open the tool window.
  6. In the tool window, you will have to add all the files that are needed. All the files will be present in the firmware folder that you have downloaded.
  7. Now, you will have to click on the start option to begin the flashing process.
  8. Wait for the process to complete and when it will complete, you will get a successful message on the screen.
  9. Now, you will see that your device is present in the boot loop mode. You will now have to boot the device in recovery mode.
  10. To do that, you will have to press the power button, home button, and volume down button and keep holding it till your phone starts vibrating. You will then have to leave the power button only.
  11. Now, you will get a menu on the screen and from the menu, you will have to select the option to wipe the data. You will have to wait for the process to complete.
  12. After the completion, your phone will restart on its own.

Download Samsung Galaxy J7 SM-J710F  Firmware Stock ROM (Flash File)

Now, this was all you need to know about installing the Samsung SM-J710F Flash file on the system. We hope that you have found the article helpful and informative.

Leave a Reply