Samsung SM-N770F Firmware Stock ROM: Flash File

In case you are looking for the Samsung SM-N770F flash file, this is the right article for you. Here is how you can install the Samsung Galaxy Note 10 flash file. We have mentioned a full stepwise process that you need to follow. Stay tuned to the article to know more about it.

Preliminary Preparations

Here are all the things that you will have to keep in mind before you can start the flashing process. Read the list carefully.

  1. First, you need to have some basic knowledge about the process. Off the chance you are not aware, you will have to consult an expert.
  2. You will also have to create a backup of the data because post flashing, you will lose all the data available on the device.
  3. Other than this, you need to charge the device at least up to 70 percent so that you can use it till the end of the process.
  4. Also, you need to download the files and the tool from an authenticated source only.

Steps to Install Samsung Galaxy Note 10 Lite SM-N770F Flash File

In this section of the article, we have mentioned different steps that you will have to follow to install the Samsung Galaxy Note 10 flash file on your system. Read the steps properly and then only proceed with the process.

  1. To start with, you will have to download the Samsung USB driver on your system and then you will have to follow the instructions appearing on the screen to complete the flashing process. In case you have it on the system, you will have to skip the step.
  2. Next, you will have to download the firmware file for your device. It will download in the zip format, you will have to extract the contents of the firmware file.
  3. Now, you will have to download the Odin tool on the system and then you will have to extract the contents of the tool file also.
  4. Once done, you will have to switch off the device, and then you will have to connect the device to the system.
  5. Now, you will have to boot it into download mode. To boot it, you will have to press the volume down button, power button, and home button together. You will then have to leave the power button when your device starts vibrating.
  6. You will now get a warning sign on the screen. To continue the process, you will have to press the volume up button.
  7. In the tool folder, you will have to look for the Odin 3 file and then click on it to open the tool window on your system. You will then have to add all the required files. You can choose all the files from the stock ROM that you have downloaded.
  8. Once done, to start the flashing process, you will have to click on the start button. Wait for the process to complete.
  9. When the process will complete, you will see the success message on the screen and you will get the device stuck at the boot loop.
  10. Now, you will have to boot the device in recovery mode. To boot it, you will have to press the volume down button, power button, and home button together. You will then have to leave the power button when your device starts vibrating.
  11. Once done, you will have to click on the wipe data or factory reset option from the menu appearing on the screen.
  12. Now, you will have to wait for the process to complete. When it will complete, the device will start on its own.

Download Samsung Galaxy Note 10 Lite SM-770F Stock Firmware ROM (Flash File)

To use Samsung Flashing Tool You must download and install WinRAR or 7Zip.

So, these were all the steps that you will have to follow to install the Samsung Galaxy Note 10 flash file. Hopefully, the article will help you.

Leave a Reply