Xiaomi Mi 2S Stock Firmware ROM: Flash File

Xiaomi Mi-2S Flash FileIn case you are looking for the Xiaomi Mi 2S Flash file, this is the right place you have come to. In this article, we have mentioned in detail how you can install the Mi 2s flash file on the system. Stay tuned to the article to know more about it.

Points to Remember

Here are some things that we will suggest you do before you can start the flashing process. It will help you to carry out the process without any issues. Read the list of all the things below.

  • The very basic thing that you need to do is to have some basic knowledge about the process. In case you do not know, you can seek help from someone else.
  • We will also suggest you charge the device completely or at least up to 70 percent so that you can carry out the process easily.
  • Next, you would know that post flashing you will lose all the data present on the device, so, it is important that you create a backup of the data.
  • You will also have to download the tool from an authenticated source only. We will also suggest you download the driver only after checking the compatibility with the device.
  • It is also important that you scan all the files to be sure that you are using the safe files on the system.

Steps to Install the Xiaomi Mi 2S Flash File

Now, in this section of the article, we have mentioned different steps that you will have to follow to install the Mi 2s flash file. Read the steps carefully and follow them in the same way as mentioned.

  • To begin with, you will have to download the Xiaomi flash tool on the system. You will then have to extract the contents of the file to the desired location.
  • When done, you will have to open the extracted tool folder and then click on the setup file. You will then have to follow the instructions appearing on the screen to complete the installation process.
  • After this, you will have to download the firmware file according to the device you are using. You will have to extract the contents of the firmware file.
  • Now, you will have to download the Xiaomi USB driver on the system. It will be available on the internet. You will have to extract the contents of the file.
  • When done, you will have to turn off the device and then you will have to boot it into the download mode.
  • Also, you need to connect the device and the system with the help of a USB cable.
  • To do that, you will have to press the volume down button and power button together and hold it for almost 8 seconds. You will see the boot mode screen.
  • Now, you will have to open the tool window. Look for the tool from the start menu.
  • When done, you will have to click on the start button and then you will have to redirect the tool to the location where you have stored the firmware file.
  • After this, you will have to click on the flash option and it will start the flashing process.
  • Wait for it to complete. When complete, you will get a success message on the screen.
  • You can now terminate the tool window and start the device.

Download Xiaomi MI 2S Stock Firmware ROM (Flash File)

This was the full stepwise process that you will have to follow to install the Xiaomi Mi 2s flash file. We have mentioned all the steps in detail so that you can carry out the process without any complexities. We hope that the article has helped you.

Leave a Reply