Xiaomi Redmi 6 Pro Firmware Stock ROM – Flash File

Xiaomi Redmi 6 flash fileIn case you are looking for Xiaomi Redmi 6 pro flash file, this is the right article for you. We have mentioned how you can install the redmi 6 pro flash file / Firmware Stock ROM on the device with the help of the Xiaomi flash tool. Stay tuned to the article to know more.

Preliminary Preparations

Before you can start installing the Redmi 6 pro flash file, here is a list of some things that you will have to keep in mind. These things will help you to carry out the process easily. Read the list properly.

  • To begin with, you need to be aware of all the technicalities. In case you are not aware, you will have to seek help. Also, the tutorial is valid for a particular device.
  • You must know that you will lose all the data post flashing, so, it is a must that you create a backup of the data.
  • You will also have to charge the device completely or at least up to 60 percent because you will have to use it till the end of the process.
  • Also, it is important to download the tool file and the firmware file from an authenticated source only. You can look for a compatible driver on the internet.
  • Lastly, we will advise you to scan all the files before using them on the system. It is important to be sure that you are using a safe file on the system.

Steps to install Redmi 6 Pro Flash File

You will have to use the Xiaomi flash tool to install the Redmi 6 pro flash file on the system. Below we have mentioned all the steps that you will have to follow to install Redmi 6 pro flash file. Read the steps carefully and follow the steps in the same way as mentioned.

  • The very first thing that you will have to do is to download the Xiaomi flash tool on the system. You will then have to extract all the files of the tool.
  • Now, in the extracted tool folder, you will have to look for the setup file and click on it. Follow all the instructions appearing on the screen to complete the installation process.
  • You will then have to download the stock firmware file on the system. You must download it according to the device you are using and then extract the contents.
  • Once done, you will have to download the USB driver on the system and install the driver on the system by following all the instructions appearing on the screen.
  • Now, you will have to turn off the device and then connect it to the system with the help of a USB cable.
  • Also, you will have to boot the device in download mode. For that, you will have to press the power and volume down button for at least 6-7 seconds.
  • Now, you will have to look for the Xiaomi flash tool in the start menu and click on it to open the tool window.
  • In the tool window, you will have to click on the select option. You will then have to redirect the tool to the location where you have stored the firmware file and select an appropriate firmware file.
  • Once done, you will have to click on the flash button to begin the flashing process.
  • Wait for the process to complete. On completion, you will get a success message on the screen.
  • Now, you can detach the file and terminate the tool window.

Download Xiaomi Redmi Pro Stock Firmware ROM- Flash File

To use Xiaomi Redmi  6 Pro Flashing Tool, You must download and install WinRAR or 7Zip.

So, this is it. This is how you can install the Redmi 6 pro flash file on the system. We have tried to provide all the valid and correct information. Hopefully, the article has helped.

Leave a Reply