Yu Yunicorn YU5530 Firmware Stock ROM- Flash File

Yu Yunicorn 5530 flash fileIn case you are looking for the Yu Yunicorn YU5530 flash file, this article can be helpful to you. We have mentioned how you can install the YU 5530 Firmware Stock ROM with the help of the SP flash tool. Read the article till the end to know more about it.

Things to Keep in Mind

In this section of the article, we have mentioned a list of all the things that you need to do before you can install the Yu Yunicorn YU5530 flash file.

  • First, you need to make sure that you use the file for a particular device. Using it for any other device can damage the device.
  • Also, you need to have some basic knowledge about the process. In case you do not know, you will have to seek help.
  • Other than this, you will have to charge the device completely or at least up to 60 percent so that you can use the device till the end of the process.
  • It is a must that you create a backup of all the data available on the device. This is a must because you will lose all the data post flashing.
  • You will also have to look for a compatible driver and tool file for the device. Also, download the firmware file according to the device that you are using.

Steps to install Yu Yunicorn YU5530 Flash File

To install the YU 5530 flash file, you will have o use the SP flash tool. In this section of the article, we have mentioned how you can do it. Below all the steps that you need to follow to install the YU 5530 flash file is mentioned. Go through all the steps properly and follow in the same way as mentioned.

  • To start with, you will have to download the MediaTek driver on the system. Now, begin the installation process by clicking on the downloaded file. Follow all the instructions appearing on the screen to complete the installation process. In case you already have the driver on the system, skip the step.
  • Next, you will have to download the firmware file for your device. You will then have to extract the contents of the firmware file.
  • Once done, you will have to download the SP flash tool on the system and then click on the downloaded file to extract the contents of the SP flash tool.
  • After this, open the tool window by clicking on the flash tool file in the extracted tool folder.
  • Now, in the tool window, you will have to click on the download agent option and scatter-loading option. You will have to look for the scatter file in the stock firmware that you have downloaded.
  • Next, you will have to click on the preloader.bin option. You must do this because if you won’t, you may brick the device.
  • Once done, you will have to click on the download option and begin the flashing process.
  • You will also have to turn off the device and then connect it to the device with the help of a USB cable. Also, you will have to press the volume up button on the device to let the tool detect the device.
  • When the tool will detect the file, the process of flashing will begin.
  • Now, the process will take some time to complete. On completion, a green ring will appear on the screen.
  • After this, you will have to detach the cable and terminate the tool window.

Download Yu Yunicorn YU5530 Stock Firmware ROM (Flash File)

To use Yu Yunicorn YU5530 Flashing Tool, You must download and install WinRAR or 7Zip.

So, now your device is flashed successfully. This was how you can install the YU 5530 Stock Firmware ROM. We have mentioned all the information that you need to know before installing the Yunicorn YU5530 flash file. Hopefully, the article was helpful.

Leave a Reply